BMW M235i xDrive Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,607)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,607)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a BMW M235i xDrive Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 BMW M235i xDriveL6-3.0L TurboService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
2015 BMW M235i xDriveL6-3.0L TurboService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$120.04 - $138.82
Show example BMW M235i xDrive Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(6,607)

Rating Summary
6,159
203
60
44
141
6,159
203
60
44
141

Robert

22 years of experience
283 reviews
Robert
22 years of experience
BMW M235i xDrive L6-3.0L Turbo - Oil Change - Fort Worth, Texas
Did an awesome job

Milton

37 years of experience
239 reviews
Milton
37 years of experience
BMW 528i L4-2.0L Turbo - Oil level is low - Las Vegas, Nevada
Helpful

Jason

9 years of experience
175 reviews
Jason
9 years of experience
BMW 128i L6-3.0L - Oil Change - Redwood City, California
Jason was great. My appointment was set in my work place parking lot , and when he couldn't get a hold of me at the time of appointment , he made the effort to check in to the office space. That was really nice! He was timely and very knowledgeable :) Thanks!

Whitney

39 years of experience
783 reviews
Whitney
39 years of experience
BMW 325i L6-3.0L - Radiator - San Jose, California
Whitney is the best of the best at what he does. Ive had other mechanics look at my cars before him and they don't pay attention to details as much as he does. With my cars (bmw/mercedes) it's very important that nothing is overlooked. He's the only mechanic i'll work with from now on!

Excellent Rating

(6,607)

Rating Summary
6,159
203
60
44
141
6,159
203
60
44
141
Number of BMW services completed
72677+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy Good Quality Windows
High High quality windows on your vehicle not only make visibility better, but they provide a safety factor. Today’s modern vehicles all feature glass that is strong and breaks differently than typical glass. For the sake of this story, we’ll...
How to Renew Your Car Registration in Nevada
There There are a number of benefits that come with living in Nevada. When first moving to Nevada, you will need to make sure that you have your car registered with the DMV. Every year, you will need to make...
8 Best Affordable Sports Cars
Drive like you mean it: 8 sleek, fast, and affordable sports cars worth the look and speed.

Blinking of ESP and ABS activation with auto-braking on bumpy roads on a 2002 MI ML320

You've got a problem with the speed system on that car and those things are very complex. What you'd want to do is watch my video "fixing insanely complex modern cars (https://www.youtube.com/watch?v=U3PuVCUqeHQ)," and you'll see how complicated your car is....

My car steering wheel shakes when I apply brakes. How can I determine if it is the front or rear brake issue?

The rule of thumb is: if you feel it in the steering wheel and the steering shaking back and forth when braking, then the front rotors are warped. If you feel the vibration more in your seat he seat of...

How to change from 2lt engine to a V8 please?

Basically, you will have to change just about everything in the drivetrain and there will be quite a few places to reinforce since the vehicle was designed to handle the torque output from a 4 cylinder engine. This swap is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com