BMW 735iL Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(717)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(717)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a BMW 735iL Brake Pad Replacement is $212 with $72 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 BMW 735iLL6-3.5LService typeBrake Pads - Rear ReplacementEstimate$328.48Shop/Dealer Price$378.15 - $512.99
1991 BMW 735iLL6-3.5LService typeBrake Pads - Rear ReplacementEstimate$319.47Shop/Dealer Price$366.05 - $498.57
1992 BMW 735iLL6-3.5LService typeBrake Pads - Front ReplacementEstimate$416.41Shop/Dealer Price$487.27 - $692.52
1990 BMW 735iLL6-3.5LService typeBrake Pads - Rear ReplacementEstimate$319.47Shop/Dealer Price$366.09 - $498.64
1990 BMW 735iLL6-3.5LService typeBrake Pads - Front ReplacementEstimate$416.41Shop/Dealer Price$489.84 - $697.03
1991 BMW 735iLL6-3.5LService typeBrake Pads - Front ReplacementEstimate$416.41Shop/Dealer Price$487.51 - $692.95
Show example BMW 735iL Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(717)

Rating Summary
683
21
4
5
4
683
21
4
5
4

Raul

35 years of experience
285 reviews
Raul
35 years of experience
BMW 735iL L6-3.5L - Car is overheating - Berkeley, California
One of the best guys in that profession very knowledgeable and quick very smart and business savvy. Wisdom beyond his years. He will be the guy i will want to work for me 24/7 excellent service excellent. Patience, speak truth no bull none at all just straight up guy .Good people..... Love his attitude ... The Best of the Best. Blessings

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
BMW 328i L6-3.0L - Brake Pads Replacement (Rear) - Houston, Texas
Overall experience is just okay; however, I felt a sense of hustle and hurry in order to move to next (appointment? maybe, i just didn't know). The core work was done; however, like this one, the dashboard indicator lights was not set off while I was told by the technician that it was all done. I knew that it took a while for him to work on the indicator..Anyway, the dashboard light (break wear indicator light) was still not set off which should be done while replacing the pad and sensor. While there maybe other things that I would complain about, I will keep that off the line at this review for this task.

Roberto

10 years of experience
46 reviews
Roberto
10 years of experience
BMW 328i L6-3.0L - Brake Pads Replacement (Front, Rear) - Phoenix, Arizona
Went above and beyond what was required to get the job done, excellent service

Luis

10 years of experience
140 reviews
Luis
10 years of experience
BMW 750Li xDrive V8-4.4L Turbo - Brake Pads Replacement (Front) - White Plains, New York
Very professional

Excellent Rating

(717)

Rating Summary
683
21
4
5
4
683
21
4
5
4
Number of BMW Brake Pad Replacement services completed
7887+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You're a Dog Trainer
If If you are a dog trainer, you expect a lot from your vehicle. You want a ride that is safe, roomy, and of course, dog friendly, since your training operation will often mean that you need to transport the...
How to Clean Windshield Wiper Blades
When you drive in wet weather or dusty conditions, it seems like your wiper blades always leave streaks unless they're brand new....
What are the Car Pool Rules in New York?
New New York is one of the most densely populated areas in the world, so it should come as no surprise that there can be a large amount of traffic on the state’s major freeways. Every day, tens of thousands...

Belt squeaking

I believe for your vehicle there is only one drive belt. The serpentine belt is kept tight via the use of an automatic tensioner. If the belt is squeaking, the tensioner needs to be checked before the belt is replaced...

The car pulls every once in a while

Hi there, thanks for writing in. Sounds like this may be related to either transmission components failing, or potentially a fuel delivery problem which may also create the jerking feeling that you're describing. Does the car run fine when in...

My speedometer stopped working

Hello. The Toyota Yaris has an ABS system that has small sensors in each wheel (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement). When the ABS system has any of these sensors that are not working, this will also cause the speedometer to not work as well....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com