BMW 640i Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a BMW 640i Car Thermostat Replacement is $369 with $229 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 BMW 640iL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$675.02Shop/Dealer Price$794.57 - $1141.86
2017 BMW 640iL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$853.87Shop/Dealer Price$1032.67 - $1564.96
2016 BMW 640iL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$853.87Shop/Dealer Price$1034.09 - $1567.44
2013 BMW 640iL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$610.85Shop/Dealer Price$730.32 - $1081.40
2012 BMW 640iL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$610.85Shop/Dealer Price$732.89 - $1085.91
2015 BMW 640iL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$853.87Shop/Dealer Price$1034.34 - $1567.87
2014 BMW 640iL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$930.57Shop/Dealer Price$1060.23 - $1426.36
Show example BMW 640i Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(4)

Rating Summary
3
0
0
1
0
3
0
0
1
0

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
BMW 640i L6-3.0L Turbo - Oil Change - Smyrna, Georgia


Omar

13 years of experience
287 reviews
Omar
13 years of experience
BMW 640i L6-3.0L Turbo - Creaking noise when turning the steering wheel - Fort Lauderdale, Florida
Knowledgeable, professional.

Jacob

13 years of experience
329 reviews
Jacob
13 years of experience
BMW 640i L6-3.0L Turbo - Brake Warning Light is on - Dallas, Texas
Jacob was outstanding!!! He provided a detail account of the services rendered and was very professional. He has a fantastic personality and is an asset to “Your Mechanic”. Very honest knowledgeable and trustworthy which are traits you don’t find often in the car service business.

Jason

33 years of experience
617 reviews
Jason
33 years of experience
BMW M6 V10-5.0L - Thermostat - San Jose, California
Excellent service

Excellent Rating

(4)

Rating Summary
3
0
0
1
0
3
0
0
1
0
Number of BMW 640i services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

Veteran and Military Driver Laws and Benefits in Ohio
The The state of Ohio offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. License fee exemption Service-connected veterans who are...
Symptoms of a Bad or Failing Turn Signal Bulb
Common signs include the turn signal indicator coming solid, blinking very fast, and the turn light bulbs themselves not blinking.
How to Inspect a Used Car For Damage
Car Car accidents happen hundreds of times every day, and sometimes cars are repaired under-the-table without having been reported. Some cars get squashed while others are sold for scrap, but there are also those that can get repaired and put...

How do you program a new personal entry code into the keyless entry system?

If your car is equipped with the keyless entry keypad, it came with a default access code. This five-digit code lets you work the locks from the keypad. However, you can also change it to something else if you prefer....

Hi I have a Hyundai accent 2011 has the malfunction indicator light flashing all the time and immobilizer Waring light flashing

Hello. Anytime you have a warning or error light illuminate, it's due to an error code being triggered and stored inside the ECU of your Hyundai. The best way to diagnose exactly why this happening is to have a local...

Will timing belt make check engine light come on

If the timing belt breaks or if it has skipped a tooth, this can cause multiple check engine light codes to be stored in your vehicle's computer system. This will then illuminate the check engine light. before having any parts...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com