BMW 530xi Electronic Control Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(28)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(28)

Electronic Control Relay Replacement Service

How much does a Electronic Control Relay Replacement cost?

On average, the cost for a BMW 530xi Electronic Control Relay Replacement is $141 with $46 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 BMW 530xiL6-3.0LService typeElectronic Control Relay ReplacementEstimate$207.35Shop/Dealer Price$247.94 - $330.34
2007 BMW 530xiL6-3.0LService typeElectronic Control Relay ReplacementEstimate$187.35Shop/Dealer Price$227.97 - $310.39
Show example BMW 530xi Electronic Control Relay Replacement prices

What is the Electronic Control Relay all about?

A wide range of electronic systems must work properly in order for the vehicle to operate. That means there is a need for several different controllers to ensure proper operation. One of the most important is the electronic control relay. You might be more familiar with the term “main relay” because of its role in vehicle performance.

The electronic control relay operates the fuel pump and sends power to the engine’s injectors. Without the main relay, fuel will not flow from the tank to the engine, and your injectors will not atomize gasoline into the combustion chamber. In short, your car wouldn’t run. Electronic control relays are subject to failure from a number of different problems, including outright failure, heat damage, cracked solder and more.

Keep in mind:

  • The electronic control relay may not operate, or may operate intermittently depending on the source of the trouble.
  • A number of other problems can masquerade as a main relay failure, so it’s vital that you have one of our expert mechanics diagnose the issue.

How it's done:

  • The electronic control relay is located and accessed then verified it needs replaced
  • The defective relay is removed from the vehicle
  • The new electronic relay is installed
  • The components that the electronic relay operates are checked for proper operation
  • The vehicle is road tested for proper operation

Our recommendation:

Traditional turnkey ignition the relay will click three times during the starting process. If you listen closely, you should hear a single click when you turn the ignition to “on”. You should hear another when the Check Engine light turns off. Finally, there should be a third click when you turn the key to the “start” position. If you do not hear a click at any of these three points, there may be a problem with the electronic control relay. Have one of our expert mechanics diagnose and replace the relay if required.

What common symptoms indicate you may need to replace the Electronic Control Relay?

  • Engine doesn’t start, especially in cold weather
  • Engine may not start a few minutes after turning it off
  • No sound from the fuel pump when the ignition key is turned to “On”

How important is this service?

Given the fact that the electronic control relay powers the fuel pump and your fuel injectors, it is essential to replace a faulty one. However, many other problems can present similar symptoms, so it’s very important to have the issue diagnosed by one of our expert mechanics.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(28)

Rating Summary
26
1
0
0
1
26
1
0
0
1

Anderson

27 years of experience
91 reviews
Anderson
27 years of experience
BMW 530xi L6-3.0L - Canister Purge Solenoid Replacement - Far Rockaway, New York
He arrived on time & completed the job.

Daniel

11 years of experience
72 reviews
Daniel
11 years of experience
BMW 530xi L6-3.0L - Starter - Chicago, Illinois

Edmar

22 years of experience
246 reviews
Edmar
22 years of experience
BMW 530xi L6-3.0L - Washer fluid does not spray onto windshield - Irving, Texas
Edmar was very professional! Would request him for future repairs. Thank you! Your service is super convenient.

Brian

23 years of experience
661 reviews
Brian
23 years of experience
BMW 530xi L6-3.0L - Power steering fluid is leaking - Jacksonville, Florida
He was very knowledgeable only after about 45 he knew what was wrong.He was very honest about what needed to be done and didn’t try to up sale on things we didn’t need

Excellent Rating

(28)

Rating Summary
26
1
0
0
1
26
1
0
0
1
Number of BMW 530xi services completed
308+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

P0204 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 4
P0204 code definition Injector Circuit Malfunction - Cylinder 4 What the P0204 code means The Engine Control Module (ECM) runs checks on...
How to Drive Your Vehicle Through a Flood
It can be dangerous to drive a car through water. Approach the flood in a low gear and find a safer route if the water is too deep to drive through.
Nevada Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Nevada. Speed limits in Nevada As of October 2015, Nevada raised its maximum allowable speed limit to 80...

Secondary coil replacement for a 2007 ES 350 Lexus

Hi there. That code is set when the primary or secondary circuit for the specified coil has failed. If you are not experiencing any drivability concerns, then it is most likely that the circuit has not failed to the point...

A/T sign in dashboard

Hello. Thanks for writing in. The warning light is telling you that the automatic transmission is having an issue. It may be a simple sensor issue which occurred during the latest work done. It may be something completely different. The...

What's the best way to get bolts off of the water pump pulley

I will usually try to break the bolts free from the pulley before I remove the belt. Sometimes you can put a little extra tension on the belt by pressing on the tensioner, while using another wrench to break the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com