BMW 525iT Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a BMW 525iT Power Steering Pressure Hose Replacement is $481 with $341 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 BMW 525iTL6-2.5LService typePower Steering Pressure Hose ReplacementEstimate$836.74Shop/Dealer Price$1013.48 - $1529.51
Show example BMW 525iT Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(5)

Rating Summary
4
0
0
1
0
4
0
0
1
0

Tien

24 years of experience
903 reviews
Tien
24 years of experience
BMW 325i L6-2.5L - Power Steering Pressure Hose - Alameda, California
Tien worked hard to fix my issues and shown to be very professional and knowledgeable.

Jonathan

36 years of experience
522 reviews
Jonathan
36 years of experience
BMW 750Li V8-4.8L - Power Steering Pressure Hose - Tarpon Springs, Florida
Great mechanic

Chris

17 years of experience
18 reviews
Chris
17 years of experience
BMW X5 L6-3.0L - Power Steering Pressure Hose - Little Elm, Texas
Very professional and does excellent work. He is the best mechanic I have ever had that worked on my car in the Frisco area. He is very good at what he does.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
BMW 740iL V8-4.4L - Power Steering Pressure Hose - Rancho Santa Margarita, California
Reliable and knowledgeable.

Excellent Rating

(5)

Rating Summary
4
0
0
1
0
4
0
0
1
0
Number of BMW Power Steering Pressure Hose Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Brake Pedal Pad
Think Think about how often you use the brakes in your vehicle, probably very often. With that said, over time your brake pedal pad can become worn down and even lose its ridges and traction. The last thing you want...
P2049 OBD-II Trouble Code: Reductant Injector Circuit High Voltage Bank 1 Unit 1
P2049 P2049 code definition Reductant Injector Circuit High Voltage Bank 1 Unit 1 What the P2049 code means This code indicates there is a problem with the electrical circuit that controls the reductant injector. What causes the P2049 code? The...
Why Is It Important to Have a Vehicle's Suspension Aligned?
Correct car suspension alignment helps your vehicle perform better. Check wheel toe, camber, and caster to make your suspension and tires last longer.

Serpentine belt came off.

It sounds like you may have a broken serpentine belt (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement) or a idler pulley (https://www.yourmechanic.com/services/idler-pulley-replacement) that may have caused the belt to fall off. I would suggest that you get a mechanic, such as one from YourMechanic, to check...

Car stalled out unexpectedly

Hello. This could happen for several reasons. Your car could have gone into a temporary limp mode because of transmission malfunction or because the battery (https://www.yourmechanic.com/services/battery-replacement) and/or alternator (https://www.yourmechanic.com/services/alternator-replacement) has low voltage causing the car to stall. This problem should...

Front end buzzes while decelerating around 2000 rpms

Hi There, What you are describing is likely related to something that may be loose on the vehicle which is producing a sympathetic vibration causing a buzz at that particular 2000 RPM mark. This happens when there is enough vibration...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com