BMW 440i xDrive Gran Coupe Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(101)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(101)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a BMW 440i xDrive Gran Coupe Water Pump Replacement is $596 with $358 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 BMW 440i xDrive Gran CoupeL6-3.0L TurboService typeWater Pump ReplacementEstimate$1181.94Shop/Dealer Price$1371.98 - $1917.78
2017 BMW 440i xDrive Gran CoupeL6-3.0L TurboService typeWater Pump ReplacementEstimate$965.12Shop/Dealer Price$1147.48 - $1687.52
Show example BMW 440i xDrive Gran Coupe Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(101)

Rating Summary
95
3
1
1
1
95
3
1
1
1

Juan

10 years of experience
426 reviews
Juan
10 years of experience
BMW 440i xDrive Gran Coupe L6-3.0L Turbo - Pre-purchase Car Inspection - Durham, North Carolina
He was very friendly and did super thorough inspection of my new car.

Roger

16 years of experience
55 reviews
Roger
16 years of experience
BMW 328i L6-3.0L - Water Pump - Austin, Texas

Thomas

13 years of experience
227 reviews
Thomas
13 years of experience
BMW 550i V8-4.4L Turbo - Water Pump - Fort Worth, Texas
My guy did a great job

Fred

18 years of experience
389 reviews
Fred
18 years of experience
BMW 750Li V8-4.8L - Water Pump - Spring, Texas
Knows his stuff. Great service.

Excellent Rating

(101)

Rating Summary
95
3
1
1
1
95
3
1
1
1
Number of BMW Water Pump Replacement services completed
1111+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

Do High Beams Use Separate Bulbs?
Your headlights have two settings – high and low. High beams are used when you’re driving at night on a...
What Causes an Exhaust Manifold to Crack or Leak?
Your car has two manifolds – an intake manifold and an exhaust manifold. Both serve essential purposes, but the one most likely to...
Is a Kinked Hose Still Safe to Use?
Hoses Hoses carry fluids from one point in your engine to another. For example, the upper radiator hose carries hot water into the radiator from the engine, while the lower radiator hose moves cooled coolant out of the radiator into...

What Is Engine Displacement?

Engine displacement is the total volume of an engine's cylinders added together. To figure out the engine’s total volume displacement, you would need to know the bore, which is the diameter of each cylinder, the stroke, which is the distance...

Lights keep burning out

If the lights on your dash are going out along with other lights like your radio lights or the clock light, then you might be having a problem with the dimmer switch in your vehicle. The dimmer switch is what...

Car trying to start but won't turn over

Be sure you have a fully charged battery that passes a load test (https://www.yourmechanic.com/services/battery-is-dead-inspection). With a fully charged battery, if the starter motor does not run that signifies an electrical problem in the starter circuit or a problem with the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com