BMW 440i xDrive Gran Coupe Loud noise is coming from rear brakes Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,607)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,607)

Loud noise is coming from rear brakes Inspection Service

How much does a Loud noise is coming from rear brakes Inspection cost?

On average, the cost for a BMW 440i xDrive Gran Coupe Loud noise is coming from rear brakes Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 BMW 440i xDrive Gran CoupeL6-3.0L TurboService typeLoud noise is coming from rear brakes InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 BMW 440i xDrive Gran CoupeL6-3.0L TurboService typeLoud noise is coming from rear brakes InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 BMW 440i xDrive Gran CoupeL6-3.0L TurboService typeLoud noise is coming from rear brakes InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 BMW 440i xDrive Gran CoupeL6-3.0L TurboService typeLoud noise is coming from rear brakes InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example BMW 440i xDrive Gran Coupe Loud noise is coming from rear brakes Inspection prices

Depending on the make and model you drive, you might have disc brakes on the front and drum brakes on the rear, or you could have four-wheel disc brakes. These are becoming more and more common today. However, regardless of the configuration, you should not have a loud noise coming from the rear brakes. This indicates that something has gone wrong, and there are several potential culprits.

How this system works:

Your rear brakes work similar to the front brakes. The master cylinder sends pressurized fluid through the brake lines. If you have rear drum brakes, the fluid causes the actuator to push the brake shoes outward, where they press against the inside of the drum. In the case of rear disc brakes, the fluid activates the caliper, which then squeezes the caliper between two brake pads.

This is identical to how your front brakes operate, but the pads are generally smaller than those used on the front. This is because most of the stopping power in your car is generated in the front.

However, your rear brakes are just as important as the front, and if you’re noticing a loud noise from the rear during braking, it could be a number of different things, depending on the type of noise and when it occurs.

Common reasons for this to happen:

  • Worn Brake Pads: Obviously, the most common potential problem here is worn out rear pads (or shoes if you have drum brakes). If you notice a loud grinding sound, it could be the metal backing plate from the pads making contact with the rotor.

  • Broken or Missing Caliper Bolt: Your calipers are essentially two halves held together with bolts (not the slide pins). If one of the bolts is missing or broken, it’s possible that part of the caliper has popped out and is making contact with your wheel.

  • Contact with the Squealer: Squealers are metal tabs designed to lightly contact the rotor and create a noise that warns you the pads are wearing down. If your pads are nearing the end of their life, it’s possible this is the noise you’re hearing.

  • Parking Brake Shoes Stuck: Your parking brake is located in the rear of the car. In a disc brake setup, there are shoes located inside the inner drum built into the rotor. If the shoes are stuck, it’s possible that the sound you’re hearing is them contacting metal while you’re driving.

  • Wheel Bearing Failure: If the noise you’re hearing is a “howl” and it’s constant, the first thing to suspect would be one of the wheel bearings (whichever side is the loudest while you’re driving).

  • Pads Settling into Place: If the sound you’re hearing is more of a “pop” or a loud click, it might be nothing more than your brake pads being slightly worn and settling into place when you push the brake pedal.

  • Normal Pad Vibration: If you only hear the noise when you’re backing up, it’s possible that it is just a normal vibration caused by the friction material of the pad lightly contacting the rotor’s surface. This is called “resonant frequency”, and can occur with both disc and drum brakes.

What to expect:

A top-rated mobile mechanic will come to your home or office and will inspect your rear brakes. This inspection will include the drums and shoes or the rotors and calipers. It should also include the brake lines and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your rear brake pads, the rotors, calipers, and the brake lines. It may be necessary to remove one or both rear wheels for a visual inspection. It may also be necessary to test drive the vehicle if the source of the problem is not immediately apparent in order for the mechanic to verify any and all noises.

How important is this service?

The mechanic will visually inspect the rear brakes, as well as other components that might be causing the noise you’re experiencing. It might be necessary for the mechanic to test drive the vehicle in order to duplicate the noise and better diagnose the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(6,607)

Rating Summary
6,159
203
60
44
141
6,159
203
60
44
141

Juan

9 years of experience
309 reviews
Juan
9 years of experience
BMW 440i xDrive Gran Coupe L6-3.0L Turbo - Pre-purchase Car Inspection - Durham, North Carolina
He was very friendly and did super thorough inspection of my new car.

Junior

26 years of experience
69 reviews
Junior
26 years of experience
BMW X5 L6-3.0L Turbo - Camshaft Position Sensor - Pompano Beach, Florida
Courteous and seemingly knowledgeable.

Joel

21 years of experience
987 reviews
Joel
21 years of experience
BMW 328i L6-3.0L - Check Engine Light is on - Jacksonville, Florida
Joel is very knowledgeable, friendly and explains things in depth.

Emmette

36 years of experience
282 reviews
Emmette
36 years of experience
BMW 325xi L6-2.5L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Fairfax, Virginia
Emmett was great, I am very happy with the work he did!

Excellent Rating

(6,607)

Rating Summary
6,159
203
60
44
141
6,159
203
60
44
141
Number of BMW services completed
72677+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

How Does a Fuel Injection Flush Work?
Fuel Fuel injectors, as their name implies, are responsible for getting fuel into the engine. Fuel injection systems either work via a throttle body containing as few as 2 injectors, or go straight into the port with one injector per...
How to Transfer a Car Title in Florida
A A car title proves ownership. If you’re buying a car, you’ll need to make sure that the title is transferred into your name. Buyers working with dealerships generally don’t have to worry about this process, as the dealer will...
P2003 OBD-II Trouble Code: Diesel Particulate Filter Efficiency Below Threshold Bank 2
P2003 P2003 trouble code definition P2003 is a generic diagnostic trouble code (DTC) that indicates a fault with the Diesel particulate filter. This code is identical to the P2002 code except that P2002 is for bank 1. What the P2003...

How do I know that my OBD system is working right?

The OBD system on your vehicle is a self-monitoring system. The Powertrain Control Module monitors and controls all of the systems and functions that regulate fuel, ignition, emissions, and engine cooling as well as having some minor control over air...

Issues with shaking in steering while driving - 1994 Ford F-150

Hey there. I would first look at tires and wheel balance, particularly if the tires have a lot of miles on them. Damaged tires (https://www.yourmechanic.com/article/how-to-check-if-your-tires-are-in-good-condition) can appear (on a balancing machine) to be balanced, yet they will vibrate terribly due...

Throttle control warning light is on and I have no power.

Hi there. The code P2127 (https://www.yourmechanic.com/article/p2127-obd-ii-trouble-code-throttle-pedal-position-sensor-switch-e-circuit-low-by-spencer-clayton) is coming on for the throttle position sensor being disconnected or not communicating with the ECM (computer). Check the throttle position sensor to see if the resistance changes when the throttle is opened and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com