BMW 435i xDrive Windshield Washer Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Windshield Washer Pump Replacement Service

How much does a Windshield Washer Pump Replacement cost?

On average, the cost for a BMW 435i xDrive Windshield Washer Pump Replacement is $177 with $16 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 BMW 435i xDriveL6-3.0L TurboService typeWindshield Washer Pump - Front ReplacementEstimate$226.74Shop/Dealer Price$264.31 - $310.07
2015 BMW 435i xDriveL6-3.0L TurboService typeWindshield Washer Pump - Front ReplacementEstimate$192.74Shop/Dealer Price$230.37 - $276.17
2016 BMW 435i xDriveL6-3.0L TurboService typeWindshield Washer Pump - Rear ReplacementEstimate$192.74Shop/Dealer Price$230.36 - $276.16
2016 BMW 435i xDriveL6-3.0L TurboService typeWindshield Washer Pump - Front ReplacementEstimate$192.74Shop/Dealer Price$230.29 - $276.04
2015 BMW 435i xDriveL6-3.0L TurboService typeWindshield Washer Pump - Rear ReplacementEstimate$192.74Shop/Dealer Price$230.41 - $276.24
2014 BMW 435i xDriveL6-3.0L TurboService typeWindshield Washer Pump - Rear ReplacementEstimate$192.74Shop/Dealer Price$230.36 - $276.16
Show example BMW 435i xDrive Windshield Washer Pump Replacement prices

What is the Windshield Washer Pump all about?

The windshield washer pump is a small electric water pump. When the washer pump is activated, it takes the washer fluid from the windshield washer reservoir and directs it to be sprayed through the washer jets onto the windshield. It is an electrical component that can fail over time. If you don't see any fluid coming out of the washer jets when you activate the windshield wiper switch, ask the mechanic to check the tubes for cracks and the nozzles for clogging.

Keep in mind:

Whenever the windshield washer pump is repaired or replaced, the entire windshield washing system should be inspected. It’s possible that the nozzles or the wiper switch are actually the cause of the problem.

How it's done:

  • Test operation of the wiper switch.
  • Make sure the nozzles are not clogged.
  • Test for power and ground at the washer pump.
  • Remove and replace the washer pump.
  • Test for proper operation of the washer system.

Our recommendation:

The windshield washing and wiping system is usually not inspected during routine maintenance. However, anytime a part of the windshield washing and wiping system is replaced or repaired, the windshield washer pump should be checked. If you notice that your vehicle is having a hard time spraying wiper fluid onto your windshield, you should schedule an inspection.

What common symptoms indicate you may need to replace the Windshield Washer Pump?

When the washer pump is activated, washer fluid doesn't spray on windshield.

How important is this service?

Your windshield washing system is designed to keep your windshield clean and your visibility high. When you pull the windshield washer switch on the steering column, the windshield washer pump is activated. The windshield washer pump is an electric water pump that pulls washer fluid from the windshield washer reservoir, and sends it to the washer jets, where it is sprayed onto the windshield through nozzles. This washer fluid acts as soap, and the windshield wiper blades then wipe it off. This process cleans your windshield of any dirt and debris that has accumulated on it.

When the windshield washer pump malfunctions, washer fluid will not be sent to the washer jets, and your vehicle will not be able to spray washer fluid onto the windshield. As a result, your visibility will decrease.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Pardeep

21 years of experience
1115 reviews
Pardeep
21 years of experience
BMW 435i xDrive L6-3.0L Turbo - Car is not starting - Los Gatos, California
Very knowledgeable, had complete faith in his approach to servicing my car

Alfred

13 years of experience
517 reviews
Alfred
13 years of experience
BMW 435i xDrive L6-3.0L Turbo - Oil Change - San Francisco, California
Super straightforward, efficient and clean. Would recommend 10/10

John

20 years of experience
584 reviews
John
20 years of experience
BMW 435i xDrive L6-3.0L Turbo - Pre-purchase Car Inspection - Orlando, Florida
Did a great job inspecting my pre purchase.

Erfan

7 years of experience
21 reviews
Erfan
7 years of experience
BMW 435i xDrive L6-3.0L Turbo - Brake Pads Replacement (Front, Rear) - Kirkland, Washington
Efran, Arrived an hour and half early and was able to finish putting on new brake pads, rotors and sensors on my 2014 BMW 435i Xdrive in approximately 3 hours. Efran, was extremely professional, knowledgeable and easy to speak with. Not only would I use Efran again, I highly recommend him.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of BMW 435i xDrive services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

What Is the Difference Between a 4-Stroke and 2-Stroke Engine?
Four-stroke and two-stroke engines have similar components, but don't work the same way. Four-stroke engines are often found in off-road vehicles.
How to Buy a Good Quality Windshield Washer Pump
You You rely on your windshield washer wipers to clear away all the dirt, slush, grime, rain, and snow. Sometimes a simple wipe isn’t enough, and this is why you turn to your windshield washer pump to provide the cleaning...
P004A OBD-II Trouble Code: Turbocharger/Supercharger Boost Control “A” Circuit/Open
P004A means there is an issue with the turbocharger or supercharger boost control in the “A” circuit due to malfunctioning boost sensor or intercooler

How should pregnant women use the seat belt?

Anyone riding in or driving the car must be buckled up. Not only is it the law, but it’s the only way to reduce the chance of injury during an accident. Don’t rely on your air bags to protect you....

Distributor rotor turns but no spark at the plugs which is where

If you are not getting any spark, a few things I would check would be the ignition coil or coils (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuse), the ignition module, the ignition system fuses (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuse), and finally the cam (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-camshaft-position-sensor) and crank position sensors (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor). Tests...

Sometimes car goes into limp mode a bit of smoke from exhaust

Hi there. Sometimes, dirty or clogged fuel injectors, throttle body or EGR valve, and mass air flow sensors can cause lack of acceleration and smaller levels of smoke from exhaust. However, there are also ignition issues that could cause this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com