BMW 435i xDrive Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a BMW 435i xDrive Car Thermostat Replacement is $593 with $313 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 BMW 435i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$966.94Shop/Dealer Price$1137.29 - $1617.14
2014 BMW 435i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$917.92Shop/Dealer Price$1080.82 - $1555.09
2016 BMW 435i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$1014.60Shop/Dealer Price$1195.11 - $1720.54
Show example BMW 435i xDrive Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Alfred

14 years of experience
587 reviews
Alfred
14 years of experience
BMW 435i xDrive L6-3.0L Turbo - Oil Change - San Francisco, California
Super straightforward, efficient and clean. Would recommend 10/10

Christopher

21 years of experience
37 reviews
Christopher
21 years of experience
BMW 435i xDrive L6-3.0L Turbo - Drive Belt Tensioner - Carteret, New Jersey
Great job.

Erfan

8 years of experience
21 reviews
Erfan
8 years of experience
BMW 435i xDrive L6-3.0L Turbo - Brake Pads Replacement (Front, Rear) - Kirkland, Washington
Efran, Arrived an hour and half early and was able to finish putting on new brake pads, rotors and sensors on my 2014 BMW 435i Xdrive in approximately 3 hours. Efran, was extremely professional, knowledgeable and easy to speak with. Not only would I use Efran again, I highly recommend him.

Duane

26 years of experience
589 reviews
Duane
26 years of experience
BMW 435i xDrive L6-3.0L Turbo - Oil Change - Oceanside, California
Great experience, really professional. Easy, convenient and all that in the comfort of my garage with a nice coffee!!

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of BMW 435i xDrive services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P0383 OBD-II Trouble Code: Glow Plug Control Module Control Circuit Low
Trouble code P0383 means the PCM has detected a low voltage reading of the glow plug heater circuit.
How Long Does a Door Lock Actuator Last?
The The door lock actuator locks and unlocks your vehicle’s doors. The lock buttons are located on each of the doors, with a master switch on the driver’s door. Once the button is pressed, it triggers the actuator, allowing the...
How to Buy a Good Quality Heater Blower Motor Resistor
Vehicles Vehicles that are equipped with a manual HVAC, or climate control, system utilize a blower motor resistor to control the speed of the heater blower. If you are driving a minivan or an SUV with a separate rear passenger...

Gas Cap

The first to do is to look at the gas refueling location to see if you have the no cap design or the cap is just missing. If you have the no cap design then you do not have to...

Burning smell from rear of vehicle

The rear brakes are probably sticking or seized. If the car has rear disc brakes that could be due to faults with the piston in the caliper bore and/or it could be due to the caliper(s) sticking on the torque...

2002 Mustang GT fault codes

All of the codes are important to resolve and it is likely that the engine is performing sub-optimally due to the underlying faults that have caused the codes to set. Some of the codes implicate the air intake system and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com