BMW 328d xDrive Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(122)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(122)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a BMW 328d xDrive Car Thermostat Replacement is $405 with $209 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 BMW 328d xDriveL4-2.0L Turbo DieselService typeCar Thermostat ReplacementEstimate$696.16Shop/Dealer Price$811.79 - $1133.17
2014 BMW 328d xDriveL4-2.0L Turbo DieselService typeCar Thermostat ReplacementEstimate$679.94Shop/Dealer Price$790.01 - $1107.21
2016 BMW 328d xDriveL4-2.0L Turbo DieselService typeCar Thermostat ReplacementEstimate$679.94Shop/Dealer Price$790.09 - $1107.35
2017 BMW 328d xDriveL4-2.0L Turbo DieselService typeCar Thermostat ReplacementEstimate$679.94Shop/Dealer Price$787.58 - $1102.95
2018 BMW 328d xDriveL4-2.0L Turbo DieselService typeCar Thermostat ReplacementEstimate$621.55Shop/Dealer Price$730.50 - $1046.87
Show example BMW 328d xDrive Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(122)

Rating Summary
119
1
0
0
2
119
1
0
0
2

Trevor

23 years of experience
185 reviews
Trevor
23 years of experience
BMW 328d xDrive L4-2.0L Turbo Diesel - Oil Change - San Diego, California
Trever was on the dot and immediately got to work. After finishing the job and doing the complimentary safety inspection, I had a few questions and he cheerfully and competently answered them.

Luis

19 years of experience
363 reviews
Luis
19 years of experience
BMW 328d xDrive L4-2.0L Turbo Diesel - Pre-purchase Car Inspection - Somerset, New Jersey
Polite and professional

Brian

24 years of experience
818 reviews
Brian
24 years of experience
BMW 328d xDrive L4-2.0L Turbo Diesel - Oil Change - Jacksonville, Florida
Brian was knowledgeable on time a friendly.

Jared

5 years of experience
91 reviews
Jared
5 years of experience
BMW 740iL V8-4.4L - Thermostat - Conyers, Georgia
Jarred was great!

Excellent Rating

(122)

Rating Summary
119
1
0
0
2
119
1
0
0
2
Number of BMW Car Thermostat Replacement services completed
1342+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Arizona
Right-of-way Right-of-way laws are in place to protect you from damaging your vehicle or someone else’s, and to protect you and other motorists and pedestrians from injury. It makes sense to obey them. To have the right of way means...
How Long Does a Throttle Kicker Actuator Last?
What What happens when you turn down things in your vehicle such as the air conditioner? It slows down in a controlled manner. Just like when you decrease your speed it's not a sudden loss of power rather it is...
How to Find Out Which License Plates are Available in Your State
When When you register your vehicle, you get a license plate. Unless you specify otherwise, you will get the standard, generic license plate for your state. However, most states have numerous options for fun, specialized license plates. Some of these...

Car will not start after replacing timing belt, camshaft, crankshaft, and purge sensor

Hello and thank you for your question. Check the three essentials that an engine needs to run. Check the air, fuel, and spark. If the engine gets fuel and has a good solid pressure, has a good strong spark at...

Does the bumper of my car need to be taken off to replace windshield washer fluid motor?

According to the Factory Service Manual for your vehicle, the front bumper does indeed have to be removed to gain access to the washer motor. Occasionally, manuals are mistaken as to procedure and/or "access", and thus there are sometimes acceptable...

Chirping sound coming from car

You're probably right. that sounds like it might be a belt slipping when you accelerate. If the belt(s) have never been replaced than they are certainly due, and at the age of your car its probably ready for a new...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com