BMW 328Ci Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a BMW 328Ci Fuel Injector Replacement is $1311 with $1059 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 BMW 328CiL6-2.8LService typeFuel Injector ReplacementEstimate$2397.00Shop/Dealer Price$2937.84 - $4534.85
Show example BMW 328Ci Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(13)

Rating Summary
12
1
0
0
0
12
1
0
0
0

Robert

32 years of experience
646 reviews
Robert
32 years of experience
BMW 328Ci L6-2.8L - Service Light is on - San Jose, California
Robert is an excellent and expert mechanic . His knowledge of vehicles as well as his extremely professional manner make him a great choice to work on your vehicle . He goes above and beyond . I have used him on two jobs, he has always called the night before to touch base, and then is always prompt and courteous. He is awesome . Not only is he a great and master mechanic but also a great person . We are lucky to have him work and repair our vehicles .

Jonathan

12 years of experience
37 reviews
Jonathan
12 years of experience
BMW 328i xDrive L6-3.0L - Fuel Injector - Land O' Lakes, Florida
Jonathan was friendly and knowledgeable. I would highly recommend.

Pierre

10 years of experience
366 reviews
Pierre
10 years of experience
BMW 328i xDrive L6-3.0L - Fuel Injector - Somerville, Massachusetts
Great guy over all came on time very professional.

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
BMW X5 V8-4.4L - Fuel Injector - Des Plaines, Illinois
The Best

Excellent Rating

(13)

Rating Summary
12
1
0
0
0
12
1
0
0
0
Number of BMW Fuel Injector Replacement services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Fuel Meter Assembly
Common signs include the fuel gauge behaving erratically and getting stuck on full or empty.
How Much Oil Does My Car Take?
Motor oil is vital to engine function. Usually 4-cylinder engines use five quarts of oil, 6-cylinder engines use six quarts, and V8 engines use eight.
The Best Tool For Mechanics to Diagnose Electrical Issues
Automotive technician jobs require tools to diagnose electrical problems. Mac Tools has a probe electrical tester that checks modern and older cars.

Missing lug nuts

It may be possible someone stole the lug nuts. If you had some kind of recent service done, where the tire and rim were removed, like a tire rotation for example. Then the mechanic may have not tightened the lug...

Can I stop rusting without sanding down and painting my car?

Rust on vehicle sheet metal, and the frame, is extremely difficult to stop once it gets a toehold. To "stop" rust already present on steel, every last minute trace of rust must be removed and then the metal has to...

My 2009 Nissan Altima feels as if it is vibrating when at stoplight occasionally. What could be the cause?

It could be that one or more motor mounts is getting tired. The Motor mounts are rubber to metal brackets, some of them have fluid capsules and they keep the engine in place while isolating the car from the normal...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com