BMW 323i Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(74)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(74)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a BMW 323i Car shuts off when stepping on gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 BMW 323iL6-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2009 BMW 323iL6-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2010 BMW 323iL6-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1998 BMW 323iL6-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2008 BMW 323iL6-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2006 BMW 323iL6-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2011 BMW 323iL6-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2007 BMW 323iL6-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example BMW 323i Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(74)

Rating Summary
68
2
1
0
3
68
2
1
0
3

Alex

6 years of experience
82 reviews
Alex
6 years of experience
BMW 323i L6-2.5L - Air Injection Hose - Oakland, California
Alex was able to install the new engine part without any problems; although I still have issues with my car, Alex was very helpful in identifying the problem that I can inform the next service mechanic about in order to fix my car.

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
BMW 323i L6-2.5L - Oxygen Sensor Replacement (Rear/Lower/Downstream) - South San Francisco, California
Overall Gregory was outstanding. He is timely, explains things well to help you make educated decision before proceeding with work. However the website was misleading because it did not indicate the number parts to be replaced during request for work and only sent one part to Gregory. Had I known that there are 2 parts of the same item to be replaced I could have known how much extra cost it would be. So make sure you contact your assigned mechanic to clarify the work and parts included prior to your appointment so there are no surprises. Fortunately, Gregory was able to find another part quickly.

Carlos

28 years of experience
504 reviews
Carlos
28 years of experience
BMW 323i L6-2.5L - Oil Change - Chino, California
great experience, very knowledgeable, got the job done right and even reset my service engine light ... 100 miles after oil service perform, no leaks! will be calling him again

Trung

12 years of experience
412 reviews
Trung
12 years of experience
BMW 323i L6-2.5L - Brakes, Steering and Suspension Inspection - Newark, California
He was great! I wish he was available for my next appointment!

Excellent Rating

(74)

Rating Summary
68
2
1
0
3
68
2
1
0
3
Number of BMW 323i services completed
814+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Figure Out How Much it Costs to Have a Car
One One of the largest expenses you have is your transportation. It’s how you get from home to work, school, the grocery store, or the movie theater, and it costs you money. Have you ever figured out how much exactly...
10 Best Stores to Buy Auto Parts in Albuquerque, New Mexico
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Abuquerque is AutoZone.
P0774 OBD-II Trouble Code: Shift Solenoid E Intermittent
P0774 means the PCM registered a problem in shift solenoid E, caused by low ATF level, failed shift solenoid, or blocked transmission passages.

Pcm ecu car won't start

Assuming the ECM is still working enough to report problems, getting any problem codes out of the system with a code reader is your best clue at this point - whether the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is illuminated or not....

2007 Ford Fusion Airbag Code B2290

If you are now getting U1900 after disconnecting the module then you may have damaged one of the pins or damaged the module when reconnecting it. You may have to replace module and have it programmed and then may still...

When i replace my radiator can i remove the condenser without replacing it and still drive my car with no problems? I

Hi Courtney. Thanks for contacting us today. I wouldn't recommend removing the condenser until you have the money to replace it. Everything is designed to fit correctly together. When you remove one component, other items will not work or fit...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com