BMW 3.0S Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(57)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(57)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a BMW 3.0S Control Arm Assembly Replacement is $336 with $222 for parts and $114 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1973 BMW 3.0SL6-3.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$600.85Shop/Dealer Price$737.57 - $1100.46
1972 BMW 3.0SL6-3.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$557.65Shop/Dealer Price$689.60 - $1038.13
1974 BMW 3.0SL6-3.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$557.65Shop/Dealer Price$689.60 - $1038.12
1971 BMW 3.0SL6-3.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$624.47Shop/Dealer Price$773.08 - $1171.68
1974 BMW 3.0SL6-3.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$624.47Shop/Dealer Price$773.16 - $1171.82
1971 BMW 3.0SL6-3.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$670.79Shop/Dealer Price$831.02 - $1264.40
1974 BMW 3.0SL6-3.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$874.99Shop/Dealer Price$1084.49 - $1666.30
1973 BMW 3.0SL6-3.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$676.79Shop/Dealer Price$837.52 - $1271.27
Show example BMW 3.0S Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(57)

Rating Summary
53
3
0
0
1
53
3
0
0
1

Brian

24 years of experience
200 reviews
Brian
24 years of experience
BMW 330xi L6-3.0L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Frederick, Maryland
Convenient . Professional and experienced.

James

31 years of experience
684 reviews
James
31 years of experience
BMW 325Ci L6-2.5L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Brea, California
James is very knowledgeable, professional and friendly. I would recommend James to anyone. Thank you for your service!

Juan

22 years of experience
13 reviews
Juan
22 years of experience
BMW Z3 L6-3.0L - Control Arm Assembly Replacement (Front Lower Left) - Watsonville, California
Juan was great! Super friendly, knowledgeable, and punctual. He replaced my brakes/rotors and a control arm from my BMW with ease. Definitely a trustworthy mechanic! I will book him again for any future autowork.

Jim

12 years of experience
58 reviews
Jim
12 years of experience
BMW 545i V8-4.4L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right, Front Lower Left, Front Lower Right) - Chicago, Illinois
Jim was a great mechanic, he came over and worked on my BMW and after 3 months my car works great. Jim was friendly, knowledgeable​ and I would highly recommend him.

Excellent Rating

(57)

Rating Summary
53
3
0
0
1
53
3
0
0
1
Number of BMW Control Arm Assembly Replacement services completed
627+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Downshift Solenoid
Common signs that this component of automatic transmissions is failing include erratic or late shifting and the Check Engine Light coming on.
P0034 OBD-II Trouble Code: Turbocharger or Supercharger Bypass Valve Control Circuit Low
P0034 P0034 trouble code definition P0035 is the code for Turbocharger or Supercharger Bypass Valve Control Circuit Low What the P0034 code means Note that each manufacturer has a slightly different definition for this code as it is relative to...
How to Replace a Secondary Air Injection Hose
A car's secondary air injection system allows oxygen into the exhaust. If a hose is faulty, a car may have increased emissions and performance issues.

car over heating after replacing alternator, fluids are full

The cooling fan on this vehicle is electrical and would need to be checked to see if it is coming on when the engine is getting hot. The fan is controlled by a blower control relay box that may not...

Car starts after jump but won't start later on

In order to know if the charging system is working you will need to have the battery charged and tested to see if it can hold a charge and take a load and cranks the motor with out a jump...

ESP light stays on dash

Hi There, This is something that usually requires the steering angle sensor (https://www.yourmechanic.com/services/steering-angle-sensor-replacement) to be re-calibrated or replaced. I would suggest having a professional from YourMechanic come to your location to have this done. As you may know, the steering...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com