BMW 3.0CSi Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(57)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(57)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a BMW 3.0CSi Control Arm Assembly Replacement is $336 with $222 for parts and $114 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1974 BMW 3.0CSiL6-3.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$594.89Shop/Dealer Price$730.12 - $1088.54
1971 BMW 3.0CSiL6-3.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$557.65Shop/Dealer Price$689.60 - $1038.13
1973 BMW 3.0CSiL6-3.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$570.89Shop/Dealer Price$706.15 - $1064.60
1971 BMW 3.0CSiL6-3.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$868.99Shop/Dealer Price$1078.73 - $1660.72
1972 BMW 3.0CSiL6-3.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$624.47Shop/Dealer Price$773.16 - $1171.82
1971 BMW 3.0CSiL6-3.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$670.79Shop/Dealer Price$831.02 - $1264.40
1973 BMW 3.0CSiL6-3.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$630.47Shop/Dealer Price$778.84 - $1177.26
1971 BMW 3.0CSiL6-3.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$842.93Shop/Dealer Price$1045.20 - $1603.55
Show example BMW 3.0CSi Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(57)

Rating Summary
53
3
0
0
1
53
3
0
0
1

Chuck

10 years of experience
347 reviews
Chuck
10 years of experience
BMW 328i L6-3.0L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Richardson, Texas
He did a great job, but it took two reschedules before he actually showed up.

James

30 years of experience
873 reviews
James
30 years of experience
BMW Z4 L6-3.0L - Control Arm Assembly Replacement (Front Upper Left) - Orlando, Florida
James was very punctual, and fixed my BMW Z4 control arm in no time. I would highly recommend getting James if you can.

Eduardo

19 years of experience
549 reviews
Eduardo
19 years of experience
BMW 745Li V8-4.4L - Control Arm Assembly Replacement (Front Lower Left) - Fresno, Texas
Excellent, Superior service! Thanks for all the help.

Allen

36 years of experience
471 reviews
Allen
36 years of experience
BMW X5 L6-3.0L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Deland, Florida
Allen always does great work!

Excellent Rating

(57)

Rating Summary
53
3
0
0
1
53
3
0
0
1
Number of BMW Control Arm Assembly Replacement services completed
627+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mercedes-Benz ML350 BlueTec
The The 2012 Mercedes-Benz ML350 BlueTec is a safe vehicle that offers many standard features such as solid wood accents, thick leather on the seats, and memory buttons to save your seating position. The ride is comfortable as it has...
P000A OBD-II Trouble Code: "A" Camshaft Position Slow Response Bank 1
P000A code definition This code is known as ‘A’ Camshaft Position Slow Response Bank 1. You may also see a 00010 fault...
How to Replace a Fuel Injector
Fuel injectors are faulty if the smell of fuel is present in the vehicle, you have engine performance issues, or the check engine light comes on.

How do I shift out of P (Park)?

You need to shift out of P (Park) and into a gear in order to start driving. Here’s how: 1. Turn on the vehicle. 2. Apply the brakes fully. 3. Press the button on the shift lever and hold it...

What is minimum thickness for rear brake discs on 2004 Cadillac SRX?

Hello, thank you for writing in. The minimum thickness for the brake rotor should be listed on the rotor itself towards the center beyond the braking surface. It will vary depending on what rotors have been installed on the vehicle....

My husband bought a Malibu that has not been able to get running he's changed plugs and wires and there was oil in those oil was down all sides of the motor changed valve cover gasket got any ideas?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com