BMW 2002 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(5)

Brake Pad Replacement Estimate for BMW 2002

BMW 2002 Brake Pad Replacement costs $179 on average.

CarServiceEstimateShop/Dealer Price
1967 BMW 2002L4-2.0LService typeBrake Pads - Front ReplacementEstimate$281.85Shop/Dealer Price$354.32 - $516.59
1969 BMW 2002L4-2.0LService typeBrake Pads - Front ReplacementEstimate$189.57Shop/Dealer Price$238.70 - $337.18
1974 BMW 2002L4-2.0LService typeBrake Pads - Front ReplacementEstimate$189.57Shop/Dealer Price$238.70 - $337.18
1974 BMW 2002L4-2.0LService typeBrake Pads - Rear ReplacementEstimate$277.79Shop/Dealer Price$348.93 - $513.55
1971 BMW 2002L4-2.0LService typeBrake Pads - Rear ReplacementEstimate$277.79Shop/Dealer Price$349.00 - $513.67
1974 BMW 2002L4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$189.57Shop/Dealer Price$238.70 - $337.18
1975 BMW 2002L4-2.0LService typeBrake Pads - Rear ReplacementEstimate$374.64Shop/Dealer Price$468.74 - $664.00
1967 BMW 2002L4-2.0LService typeBrake Pads - Rear ReplacementEstimate$282.79Shop/Dealer Price$354.39 - $519.34
Show example BMW 2002 Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Chi

25 years of experience
6 reviews
Chi
25 years of experience
BMW 2002 L4-2.0L - Battery - Oakland, California
Chi finally got my car up and running, and I'm super happy. I'd wait a week, to work with Chi vs another mechanic. He's that good. Friendly, knowledgeable, and genuinely wants to help and get you back on the road. 6 stars.

Chi

25 years of experience
6 reviews
Chi
25 years of experience
BMW 2002 L4-2.0L - Ignition Coil - Oakland, California
Chi is awesome. He truly went above and beyond to help me out. Highly recommended. He didn't give up.. and even though this visit didn't fix the issue... I'm confident it will be fixed with the next visit now. He doesn't give up... super thorough.

Tien

23 years of experience
903 reviews
Tien
23 years of experience
BMW 2002 L4-2.0L - Car is not starting - Oakland, California
Friendly, helpful and punctual. Diagnosed the problem very quickly. thanks Tien!

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
BMW 2002 L4-2.0L - Car is not starting - San Francisco, California
Grzegorz was quick at pin pointing the problem with my car and fixing it. He was also helpful in letting me know what caused the problem and what to look out for if my problem should occur again. Overall he was very helpful.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of BMW 2002 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.
How to Get Smog Technician Certified in Utah
Automotive technician jobs include smog certified emissions inspectors. In Utah, you need to work at an emissions testing station.
P2702 OBD-II Problem Code: Trans Friction Element C Apply Time Range/Performance
P2702 means that a malfunction has occurred with the transmission friction element’s application due to leaks or low transmission fluid.

Hi i have knocking sound in my vvt solenoid in my Volvo S40 model 2000 and I changed the vvt solenoid with new one but I still ha

It is possible that the noise is just a normal function of the solenoid. It is also possible that the new solenoid you have is also a faulty part. If you have a warranty you could try replacing it under...

Got new water pump less than 9 months ago. Now boiling sound and overheating smell. Temp says its good

Hello. The overheating issue your vehicle is having is likely not caused by the water pump once again. Though an inspection of your water pump performance should be checked when trying to diagnose this issue. The temperature gauge not going...

My water pump is leaking, do I need more coolant?

If you plan on using the vehicle, you should absolutely add more coolant. Do NOT drive the vehicle without coolant. Overheating an engine can permanently damage the engine and several other components. The water pump will need to be replaced....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com