BMW 2000c Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(55)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(55)

Control Arm Assembly Replacement Estimate for BMW 2000c

BMW 2000c Control Arm Assembly Replacement costs $383 on average.

CarServiceEstimateShop/Dealer Price
1967 BMW 2000cL4-2.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$618.47Shop/Dealer Price$775.49 - $1180.40
1965 BMW 2000cL4-2.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$818.93Shop/Dealer Price$1025.74 - $1587.51
1966 BMW 2000cL4-2.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$552.89Shop/Dealer Price$693.19 - $1055.42
1968 BMW 2000cL4-2.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$652.79Shop/Dealer Price$818.02 - $1255.14
1969 BMW 2000cL4-2.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$850.99Shop/Dealer Price$1065.85 - $1651.68
1966 BMW 2000cL4-2.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$652.79Shop/Dealer Price$818.06 - $1255.22
1968 BMW 2000cL4-2.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$582.53Shop/Dealer Price$728.52 - $1093.98
1967 BMW 2000cL4-2.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$582.53Shop/Dealer Price$729.50 - $1095.70
Show example BMW 2000c Control Arm Assembly Replacement prices

Control Arm Assembly Replacement Service

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(55)

Rating Summary
51
3
0
0
1
51
3
0
0
1

Mazyar

8 years of experience
391 reviews
Mazyar
8 years of experience
BMW 530xi L6-3.0L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Conyers, Georgia
Did an excellent job, gave good advice

Brian

24 years of experience
187 reviews
Brian
24 years of experience
BMW 330xi L6-3.0L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Frederick, Maryland
Convenient . Professional and experienced.

Miguel

21 years of experience
227 reviews
Miguel
21 years of experience
BMW X5 L6-3.0L Turbo - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - East Orange, New Jersey
Miguel is one of the best mechanics I have come across. He’s effecient, pays attention to detail; explains what’s he’s going do before he does it. He goes above and beyond. Something that is very rare in the mechanic industry. And honesty and fairness goes a long way too. I will be requesting his expertise in the future.

Diego

21 years of experience
564 reviews
Diego
21 years of experience
BMW X5 L6-3.0L Turbo Diesel - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Phoenix, Arizona
He is extremely thorough...

Excellent Rating

(55)

Rating Summary
51
3
0
0
1
51
3
0
0
1
Number of BMW Control Arm Assembly Replacement services completed
605+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

Understanding the Plymouth Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Plymouth service indicator lights indicate when and what service your car needs.
B1932 OBD-II Trouble Code: Air Bag Driver Circuit Open
B1932 means there is an error with the driver side's airbag circuit, most likely due to faulty wiring or a defect in the airbag deployment system.
B1250 OBD-II Trouble Code: Air Temperature Internal Sensor Circuit Failure
B1250 means there is an error with the air temperature internal sensor, mostly caused by a defective sensor or damaged electrical components.

2000 Mustang v6 manual has whining sound coming from the power steering pump even after replacing the rack and pinion, pump & HPL

If you haven't already done so, disconnect the drive belt to the pump and briefly run the engine to be sure that the noise is not coming from elsewhere. If indeed the noise is from the pump, be sure you...

White milky stuff in oil cap and loosing coolant around two cups a week

If you have a continuing coolant leak, and the leak does not appear to be external, there is a possibility that coolant is leaking into the crankcase. Depending on the engine design, such a coolant leak could be via the...

I had p2096 and 2196 codes. I replaced the upstream o2 sensor. The p2196 went off for a while but the 2096 remained.

The two codes indicate that the air fuel ratio in the engine is off. In your circumstance, the short and long term fuel trim values should be read and evaluated using a real time scan tool as that will help...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com