logo

BMW 1600ti Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(6)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a BMW 1600ti Wheel Bearings Replacement is $303 with $199 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1967 BMW 1600tiL4-1.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$554.21Shop/Dealer Price$680.39 - $1015.62
1968 BMW 1600tiL4-1.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$532.21Shop/Dealer Price$658.43 - $993.68
1968 BMW 1600tiL4-1.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$549.94Shop/Dealer Price$677.48 - $996.99
1966 BMW 1600tiL4-1.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$549.94Shop/Dealer Price$677.42 - $996.88
1968 BMW 1600tiL4-1.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$549.94Shop/Dealer Price$677.53 - $997.07
1967 BMW 1600tiL4-1.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$532.21Shop/Dealer Price$658.42 - $993.68
1967 BMW 1600tiL4-1.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$557.94Shop/Dealer Price$685.10 - $1004.32
1966 BMW 1600tiL4-1.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$537.71Shop/Dealer Price$664.38 - $999.97
Show example BMW 1600ti Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of BMW Wheel Bearings Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(6)
Rating Summary
4
2
0
0
0
4
2
0
0
0

Tom

42 years of experience
205 reviews
Request Tom
Tom
42 years of experience
Request Tom
by Richard
BMW 545i V8-4.4L - Wheel Bearings Replacement (Passenger Side Rear) - San Jose, California
Tom came to replace my rear wheel bearing on my bmw, thought it would be somewhat of a easy job, but let me tell you it was a major pain, the hub was ceased onto the bearing and the rear axle was kind of stuck on the hub, let me tell you tom was amazing, the was suppose to be about 1.7 hours, I think he was there about 5hrs and determined to repair my car. Tom was great and will definitely use him again.

Craig

16 years of experience
67 reviews
Request Craig
Craig
16 years of experience
Request Craig
by Gabor
BMW X3 L6-3.0L - Wheel Bearings Replacement (Passenger Side Front) - San Jose, California

Will

12 years of experience
49 reviews
Request Will
Will
12 years of experience
Request Will
by Tom
BMW X5 V8-4.8L - Wheel Bearings Replacement (Driver Side Front) - Scottsdale, Arizona
Will was not only on-time, he was early! I love the way the service lets me know when the mechanic is on his way. Will did great work and was very competent even though he ran into some challenges with some stuck bolts.

Dave

23 years of experience
303 reviews
Request Dave
Dave
23 years of experience
Request Dave
by Gabor
BMW X3 L6-3.0L - Wheel Bearings Replacement (Passenger Side Front) - San Jose, California

Excellent Rating

(6)
Rating Summary
4
2
0
0
0
4
2
0
0
0
Number of BMW Wheel Bearings Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

How Long Does a Speed Control Assembly Last?
Using Using the gas pedal allows you to speed up and control the car on the road, but it can be a chore when driving long distances on relatively flat roads with little to no other traffic. It can lead...
Read more
How to Buy a Personalized License Plate in Oregon
A A personalized license plate is a great way to add some of your personality to the front and back of your car. A personalized plate gives you the opportunity to use your car to project a sentiment. You can...
Read more
P2147 OBD-II Trouble Code: Malfunction with the Fuel Injector Group A Supply Voltage Circuit Low
P2147 P2147 code definition P2147 is a generic OBD-II diagnostic trouble code indicating a malfunction with the fuel injector group A supply voltage circuit low. What the P2147 code means The P2147 code means than the fuel injector group A...
Read more

Car starts but won't run.

If your engine starts but won't stay running (idling) the problem is most likely a faulty idle air control (IAC) motor. (https://www.yourmechanic.com/services/idle-control-valve-replacement) The IAC opens and closes to maintain engine idle, if this component goes out, the engine will keep stalling....
Read more

Smoke coming from under my hood.

Hello there, thanks for writing in. I would be glad to help you out here. Most likely you have a leak. When the vehicle engine is stone cold, look around the valve cover gasket (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-valve-cover-gasket) for liquid oil and then...
Read more

Need estimate on blown head gasket repair for 1996 s10 4.3 v6

Head gasket replacement sometimes requires machine shop work. If the head and block are not flat within an incredibly tiny tolerance (often .002 inches), it's a waste of time to replace the gasket as it will just leak anew. So,...
Read more
  1. Home
  2. Estimates
  3. BMW
  4. 1600ti
  5. Wheel Bearings Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE