Audi S7 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Audi S7 Brake Master Cylinder Replacement is $584 with $461 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Audi S7V8-4.0L TurboService typeBrake Master Cylinder ReplacementEstimate$1813.36Shop/Dealer Price$2259.96 - $3498.50
2013 Audi S7V8-4.0L TurboService typeBrake Master Cylinder ReplacementEstimate$1777.36Shop/Dealer Price$2224.04 - $3462.64
2017 Audi S7V8-4.0L TurboService typeBrake Master Cylinder ReplacementEstimate$1092.08Shop/Dealer Price$1340.39 - $2044.74
2015 Audi S7V8-4.0L TurboService typeBrake Master Cylinder ReplacementEstimate$1777.36Shop/Dealer Price$2223.94 - $3462.45
2016 Audi S7V8-4.0L TurboService typeBrake Master Cylinder ReplacementEstimate$1092.08Shop/Dealer Price$1367.51 - $2092.20
2018 Audi S7V8-4.0L TurboService typeBrake Master Cylinder ReplacementEstimate$1044.59Shop/Dealer Price$1287.88 - $1988.48
Show example Audi S7 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

AL

12 years of experience
234 reviews
AL
12 years of experience
Audi S7 V8-4.0L Turbo - Spark Plugs - Denver, Colorado
Al was extremely friendly and knows exactly what he is doing. Gave me a few pointers to keep an eye on to keep the car running healthy Thank you again!

Nazareth

27 years of experience
275 reviews
Nazareth
27 years of experience
Audi S7 V8-4.0L Turbo - Battery - El Monte, California
Excellent and very professional. Highly recommended!!! Took care of my Audi S7 and solved my problem with the car.

Engel

23 years of experience
5 reviews
Engel
23 years of experience
Audi S7 V8-4.0L Turbo - Pre-purchase Car Inspection - Arlington, Virginia
Fully explained what he saw of the car in PPI and made me feel confident in the health of the vehicle. Responded in timely manner when I messaged him. Great experience all around.

Leslie

14 years of experience
81 reviews
Leslie
14 years of experience
Audi S7 V8-4.0L Turbo - Pre-purchase Car Inspection - Newtown Square, Pennsylvania
Leslie did a pre-purchase car inspection for me and I was very happy with his communication and the report. He arrived early and promptly called me once the inspection was done to let me know the results.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Audi S7 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Cooling/Radiator Fan Motor
Fans Fans are necessary to keep the components under your car’s hood from overheating. Excessive heat can cause warping, melting, and other damage, not to mention the additional energy suck. The radiator is one of the hottest parts in the...
What are the Car Pool Rules in New Mexico?
Car Car pool lanes have been around for a few decades, and have rapidly gained popularity in recent years. These now cover more than 3,000 miles in many of the country’s states, and help a huge number of drivers every...

Car is totally dead

Sounds like you might not be getting any power out of the battery. Car batteries are 12.6 v. when they are fully charged. If the voltage is 10.5v. The car won't crank but all the accessories will still function. At...

My windows keep fogging up and I have no idea why?

Claimed by Blake Griffin

Can you give me an average cost for a Turbo Replacement in Q5?

Hi there. Unfortunately, we are not able to offer this type of service on your Audi as the turbo system is very complex and should be replaced by an authorized Audi dealership or repair center.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com