Audi RS5 Sportback Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,394)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,394)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Audi RS5 Sportback Brake Drum Replacement is $427 with $265 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Audi RS5 SportbackV6-2.9L TurboService typeBrake Drum ReplacementEstimate$726.04Shop/Dealer Price$875.69 - $1286.36
Show example Audi RS5 Sportback Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,394)

Rating Summary
2,221
85
19
12
57
2,221
85
19
12
57

Claud

8 years of experience
482 reviews
Claud
8 years of experience
Audi RS5 Sportback V6-2.9L Turbo - Pre-purchase Car Inspection - Troy, Michigan
Very impressed by Claud's work. His report and summary gave me the peace of mind required to make a sound decision. Would recommend his services to friends and family.

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Audi RS5 Sportback V6-2.9L Turbo - Pre-purchase Car Inspection - Menifee, California
Good communication before and after appointment. Called shortly after the appt and talked through his review. Much appreciated.

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Audi A6 Quattro V6-3.2L - Spark Plugs - Pleasant Hill, California
I wish I could give Joshua a better overall rating. The process and experience was exceptional and I would have recommended him to anyone. However the $700 I paid to repair the car didn't fix the problem. I understood and asked that Joshua think more and converse with others as to what it might be for further action. I only did not receive a followup call from him but he hasn't returned my calls all week. I'm in a business where we can do a project 98% complete, but the client always remembers the last 2%. The great experience I had and the overall professionalism I was receiving has been soured by the lack of follow-up.

Torrieanto

12 years of experience
632 reviews
Torrieanto
12 years of experience
Audi Q3 Quattro L4-2.0L Turbo - Oil Change - Riverview, Florida
He is awesome. Fast work

Excellent Rating

(2,394)

Rating Summary
2,221
85
19
12
57
2,221
85
19
12
57
Number of Audi services completed
26334+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mercedes-Benz ML350 BlueTec
The The 2012 Mercedes-Benz ML350 BlueTec is a safe vehicle that offers many standard features such as solid wood accents, thick leather on the seats, and memory buttons to save your seating position. The ride is comfortable as it has...
P0219 OBD-II Trouble Code: Engine Overspeed Condition
P0219 trouble code definition Engine overspeed condition What the P0219 code means The P0219 code means that the revolutions per minute of...
How to Safely Drive in Stop-and-Go Traffic
It’s It’s a basic tenet of owning a car: nobody likes driving in traffic. Whether you’re stuck in traffic for five minutes as you look for the next exit, or spend two hours in congestion every day on your commute...

AC not working correctly

Hi. When air comes out of the vents at uneven temperatures, the blend door actuator is usually at fault. Either debris buildup is blocking the door from moving or the electronic actuator on the door itself is malfunctioning. A technician...

I changed the spark plugs and now my car is puttering, revving up on its own, and making a whistling noise

If these symptoms did not exist prior to the spark plug replacement (https://www.yourmechanic.com/services/spark-plugs-replacement), it would appear as if something was disturbed, disconnected or broken during that maintenance. You want to make sure that all of the plugs were installed with...

The engine was replaced by Holden 18months ago, then last month there was a fuel pump error which ended with Holden having to advise the mechanic what to do to correct the error (maybe was the sensor) anyway after paying $1400 thy now advise the engine mount needs replacing for $1600. They sold the car and have serviced/repaired it since new (10yrs) should they have not noticed the mount when they replaced the old engine with new?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com