Audi RS e-tron GT Brake fluid is leaking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,467)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,467)

Brake fluid is leaking Inspection Service

How much does a Brake fluid is leaking Inspection cost?

On average, the cost for a Audi RS e-tron GT Brake fluid is leaking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Audi RS e-tron GTElectricService typeBrake fluid is leaking InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Audi RS e-tron GT Brake fluid is leaking Inspection prices

Your brakes are the most important safety system on your vehicle. It’s all too easy to take them for granted, but if they were to fail even once, the results could be catastrophic. Most automotive brake systems are hydraulic, which means that pressurized fluid is sent through the lines from the master cylinder to the calipers and drums in order to activate the pads/shoes and slow down the car. If your brake fluid is leaking, it’s a sign that there’s something seriously wrong.

How this system works:

Your brake system is both simple and complex. There are a number of parts required to make it work properly, but the underlying concept is not that difficult to understand. Your master cylinder is the heart of the system – it is responsible for both boosting brake performance (via the brake booster onto which the master cylinder mounts), and for holding and sending brake fluid through the system.

In a nutshell, your brake system works like this: You press the brake pedal, which activates the master cylinder. It pushes fluid into the lines and down to the calipers. The fluid pressure forces the calipers to close, squeezing the rotor between the brake pads. This creates drag and friction, slowing down the car.

However, if fluid is leaking from somewhere in the system, it could mean that you’ll have insufficient fluid for proper brake operation.

Common reasons for this to happen:

  • Worn Brake Pads: If you suspect fluid is leaking because the level in the reservoir is low, it might be nothing more than worn pads. As the pads wear, more fluid is held in the system (because the caliper piston remains farther out due to the reduced pad material).

  • Damaged Master Cylinder Reservoir: Over time, the plastic reservoir attached to your master cylinder becomes brittle due to heat exposure. It can eventually crack, allowing brake fluid to seep out and down the back of the engine.

  • Damaged Bleeder Valve: Each caliper has a bleeder. These valves allow mechanics to bleed air out of the lines, but they can become damaged (or can be knocked loose or even left loose after inexpert service).

  • Damaged Brake Line: Your car has both rubber and steel brake lines that carry fluid to and from the master cylinder. Both types are prone to wear and can be punctured. If this occurs, fluid will steadily leak out of the line.

  • Failed Wheel Cylinder: On drum brakes, one of the most likely culprits is the wheel seal. These will fail over time and through normal wear and tear, eventually weeping brake fluid.

  • Failed Piston Seal: The piston in your caliper is activated by fluid, and it’s a moving part, which means a seal is necessary to keep the fluid inside while allowing the piston to move. If the seal is damaged (cracked or punctured), it will leak brake fluid.

What to expect:

A professional mobile mechanic will come to your home or office to inspect your brake system, including the master cylinder, brake lines, drums, calipers and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of your vehicle’s brake system, including possibly checking trouble codes in the computer if the ABS light is on (set off by the brake fluid level sensor). The mechanic will trace the leak to its origin, and then advise you on the next step required to repair the problem.

How important is this service?

Without an operational brake system, your car cannot be legally or safely driven. Leaking fluid is cause for concern – if the fluid level drops below a certain level, the brakes will not work. It’s essential to have your brake system inspected during normal maintenance, and to pay close attention to the fluid level in the reservoir. Any leaks should be immediately inspected and repaired. One of our professional mechanics can inspect, diagnose and repair your brake fluid leak.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,467)

Rating Summary
2,288
87
19
12
61
2,288
87
19
12
61

Mazyar

8 years of experience
497 reviews
Mazyar
8 years of experience
Audi A6 Quattro V6-3.2L - Brake fluid is leaking - Conyers, Georgia
Very professional and quickly was able to inspect my vehicle. He showed me the parts that needed replacement/repair explained where the repairs were needed. Going to schedule and have him complete the repairs. EH

Ira

12 years of experience
34 reviews
Ira
12 years of experience
Audi A6 V6-3.2L - AC Compressor - Marietta, Georgia
Great timely, patient and knowledgeable.

Henry

34 years of experience
175 reviews
Henry
34 years of experience
Audi A4 Quattro L4-2.0L Turbo - Fuel Pump - Mount Laurel, New Jersey
Professional, knowledgeable, on-time & efficient

John

27 years of experience
1057 reviews
John
27 years of experience
Audi A4 Quattro L4-2.0L Turbo - Car is not starting - Dickinson, Texas
Great service technician super friendly.

Excellent Rating

(2,467)

Rating Summary
2,288
87
19
12
61
2,288
87
19
12
61
Number of Audi services completed
27137+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Canister Purge Solenoid
Common signs of a problem with a car EVAP canister purge solenoid include rough idle, difficulty starting, and the Check Engine Light turning on.
How to Drive a Prius in the Winter
Driving Driving during extreme weather conditions brings its own challenges. For example, snow and ice can make roads slippery, causing drivers to lose control of their vehicles. It can also be hard to stop when the roads are too slick....
How to Replace a Power Steering Control Unit
Signs of a failing power steering control unit include an illuminated EPS (Electric Power Steering) Warning Light or difficulty steering the vehicle.

My negative battery cable start smoking when the car is running.

There is a faulty, high resistance (often due to corrosion, wire defect or break or loose mechanical connection) connection at the battery post and/or at the vehicle ground(s) at the frame. The recommended and safest practice is to replace the...

CEL lights p0501 p0500 p1529 u1400 on 2001 Hyundai Elantra

Codes P0500, P0501, and P1529 are related to vehicle speed sensor input. The engine control unit relies on sensor input from the wheels and transmission - as well as dozens of other sensors - to determine how fast the vehicle...

2005 Ford Escape v6. Had a bad A/c compressor. So I replaced with a new one. Added my 4oz of oil and can not get the clutch to engage (i will jump it later to add Freon) in the meantime I noticed the radiator fans are not kicking on (they were working previously to the A/c compressor being replaced). To diagnose to radiator fans I have checked the fuses and they look good. 8 also replaced the relays and jumped the fans to the battery (which they do come on at that point). So my next step was to replace the temperature switch sensor, which I did and the fans still are not engaging. I feel like I have done everything I know to do and still can’t come up with an answer. Also note previously to all of this last year the heat was not blowing as hot. At that time I back flushed the lines and added new [coolant](/topics-coolant-ford/). The heat worked a little better or so I thought. But again with all that is going on now the heat is not the best again, which is one of the reason I thought it was going to be the temperature switch that was bad.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com