Audi Coupe Quattro Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Audi Coupe Quattro Mass Airflow Sensor Replacement is $444 with $282 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Audi Coupe QuattroL5-2.3LService typeMass Airflow Sensor ReplacementEstimate$760.08Shop/Dealer Price$930.99 - $1376.75
1990 Audi Coupe QuattroL5-2.3LService typeMass Airflow Sensor ReplacementEstimate$726.08Shop/Dealer Price$897.04 - $1342.85
Show example Audi Coupe Quattro Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(4)

Rating Summary
3
1
0
0
0
3
1
0
0
0

Rodney

36 years of experience
547 reviews
Rodney
36 years of experience
Audi A4 Quattro L4-1.8L Turbo - Mass Airflow Sensor - West Sacramento, California
Rodney is my personal mechanic for life. He did a great job!

H

26 years of experience
828 reviews
H
26 years of experience
Audi A6 Quattro V6-2.7L Turbo - Mass Airflow Sensor - Mountain View, California

Kyle

13 years of experience
145 reviews
Kyle
13 years of experience
Audi A4 Quattro L4-1.8L Turbo - Mass Airflow Sensor - Dallas, Texas
I have a 2000 Audi A4. Kyle was very timely. He called ahead to let me know his arrival time. He repaired an air flow sensor on my vehicle in a very timely manner. Very professional.

Chet

41 years of experience
493 reviews
Chet
41 years of experience
Audi A4 Quattro L4-1.8L Turbo - Mass Airflow Sensor - Chula Vista, California
Thanks chet storch

Excellent Rating

(4)

Rating Summary
3
1
0
0
0
3
1
0
0
0
Number of Audi Mass Airflow Sensor Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How Long Do Wiring Harnesses Last?
Car wiring harnesses connect all the different electrical systems and components in a vehicle. Wiring harnesses can last the lifetime of the vehicle.
How Long Does a Refrigerant Pressure Sensor (Switch) Last?
Your Your car’s air conditioning system helps keep you and your passengers cool and comfortable during hot weather. It also plays a role in operating the front defroster. In order to operate properly, the system needs a refrigerant – just...
How to Replace a Washer Fluid Level Switch
The washer fluid level switch fails when the Windshield Fluid Warning Light stays illuminated or there are unusual noises coming from the washer pump.

What would cause brand new O2 sensors to give codes 172, 173, 176, and 177, rich and lean conditions, both sides at the same time?

When it comes to across-the-board codes being set such as this, it is usually a result of something "upstream" creating the condition to set all these codes. For instance, it is rare for both O2 sensors to fail at exactly...

Car won't start after replacing cam sensor - 2006 Scion xA

Hello. You will need to have the computer scanned and system checked for codes indicating the problem. You may have a bad crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) or computer problems with the anti-theft system. If you would like to have this corrected,...

Cam shaft position sensor

Hi there. The camshaft position sensors (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) are located on the front of your engine on the top under the engine cover. I usually do a complete inspection before replacing these because there are a number of reasons as to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com