Audi A5 Quattro Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(118)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(118)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Audi A5 Quattro Power Steering Pressure Hose Replacement is $565 with $383 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Audi A5 QuattroL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$1008.30Shop/Dealer Price$1214.68 - $1823.29
2010 Audi A5 QuattroV6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$1029.19Shop/Dealer Price$1243.21 - $1875.89
2009 Audi A5 QuattroV6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$1175.61Shop/Dealer Price$1426.29 - $2168.83
2008 Audi A5 QuattroV6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$1164.19Shop/Dealer Price$1412.01 - $2145.98
2018 Audi A5 QuattroL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$981.77Shop/Dealer Price$1184.09 - $1781.33
2016 Audi A5 QuattroL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$996.59Shop/Dealer Price$1202.83 - $1811.34
2014 Audi A5 QuattroL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$956.59Shop/Dealer Price$1152.55 - $1730.85
2015 Audi A5 QuattroL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$996.59Shop/Dealer Price$1202.51 - $1810.78
Show example Audi A5 Quattro Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(118)

Rating Summary
109
5
0
1
3
109
5
0
1
3

Bryan

9 years of experience
102 reviews
Bryan
9 years of experience
Audi A5 Quattro L4-2.0L Turbo - Fog/Driving Light Bulb Replacement (Driver Side, Passenger Side) - Las Vegas, Nevada
Explained his work and did a great job

David

14 years of experience
463 reviews
David
14 years of experience
Audi A5 Quattro V6-3.2L - Crankshaft Position Sensor - Acworth, Georgia
David was nice, showed me pictures of possible future problems and how to fix it. Someone I feel I can trust, on time great work truly an ace!

Chris

9 years of experience
22 reviews
Chris
9 years of experience
Audi A5 Quattro V6-3.2L - Spark Plugs - Grand Prairie, Texas
Knew everything about Audi and Gave me great pointers on what to put in my baby and what needs to be done to keep her healthy

Nicholas

12 years of experience
303 reviews
Nicholas
12 years of experience
Audi A5 Quattro L4-2.0L Turbo - Brake Pads Replacement (Front, Rear) - Houston, Texas
Nick provided great service and was very trustworthy. Fast, easy and excellent quality. Very thorough. Would highly recommend Nick and will be specifically requesting for the next service.

Excellent Rating

(118)

Rating Summary
109
5
0
1
3
109
5
0
1
3
Number of Audi A5 Quattro services completed
1298+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

Should I Get an EPA Technician Certification?
Automotive technician jobs often require EPA technician certification for mechanics, so you can make repairs on automotive air conditioning systems.
How Do I Prepare My Car for Summer?
Summer's Summer's heat, dust, and stop-and-go traffic will take their tolls on your vehicle. Follow these tips to ensure optimum wellness of your car: Air Conditioning: Have your air conditioning inspected (https://www.yourmechanic.com/services/heating-ac-inspection) by a qualified technician. Newer models have cabin...
How to Replace a Lost or Stolen Car Title in Iowa
Owning Owning your own vehicle is an exciting and proud moment. In the United States as proof of this ownership you are given something that is called a Certificate of Title, or a car title. It is in fact a...

Failed smog check

Hi. This is a fairly common concern for smog failure, it indicates the computer has detected a large leak in the evaporative emissions system. 90% of the time this is due to the fuel cap not being secured properly. Sometimes,...

Acceleration issue, RPMs increase but not speed

If your car is revving up but not moving, or is slow at gaining speed, then you have a slipping clutch. If you have a manual or automatic transmission it will still be a clutch issue. A mechanic with experience...

no key detected

Hi there. It's quite possible that your key's battery has worn out; which typically causes this issue to occur. When your battery dies in your key you should be able to start your car as normally for a while. The...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com