Audi 90 Quattro Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Audi 90 Quattro Control Arm Assembly Replacement is $212 with $72 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Audi 90 QuattroV6-2.8LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$774.12Shop/Dealer Price$918.98 - $1332.28
1991 Audi 90 QuattroL5-2.3LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$870.71Shop/Dealer Price$1055.10 - $1601.05
1993 Audi 90 QuattroV6-2.8LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$662.07Shop/Dealer Price$777.72 - $1113.69
1994 Audi 90 QuattroV6-2.8LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$599.17Shop/Dealer Price$705.74 - $1015.94
1994 Audi 90 QuattroV6-2.8LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$760.61Shop/Dealer Price$904.75 - $1317.53
1990 Audi 90 QuattroL5-2.3LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$666.37Shop/Dealer Price$799.96 - $1192.87
1990 Audi 90 QuattroL5-2.3LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1750.21Shop/Dealer Price$2154.54 - $3360.17
1991 Audi 90 QuattroL5-2.3LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$517.09Shop/Dealer Price$613.12 - $893.88
Show example Audi 90 Quattro Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

Antonios

19 years of experience
56 reviews
Antonios
19 years of experience
Audi Q5 V6-3.2L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Allston, Massachusetts
Great service. Highly recommended!

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Audi A4 Quattro L4-2.0L Turbo - Control Arm Assembly Replacement (Front Lower Left) - Gilbert, Arizona
Great work.

Elias

15 years of experience
225 reviews
Elias
15 years of experience
Audi A5 Quattro V6-3.2L - Control Arm Assembly Replacement (Rear Lower Left) - Rahway, New Jersey
good expertise and worker

Steve

16 years of experience
27 reviews
Steve
16 years of experience
Audi A4 V6-3.0L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Austin, Texas
Steve is TOP NOTCH, seriously. He does great work quickly, shows you what's going on with the car, and makes sure that you're getting a fair deal. I highly recommend Steve for any auto-servicing you need. I'll never go back to a standard shop again.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Audi Control Arm Assembly Replacement services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

P0363 OBD-II Trouble Code: Misfire Detected - Fueling Disabled
P0363 P0363 code definition If the PCM has stored the P0363 code, it indicates that there has been a misfire in a cylinder, and that the PCM has disabled the fuel supply to the malfunctioning cylinder. What the P0363 code...
Understanding the Saturn Oil Life Monitor and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Saturn Oil Life Monitor indicates when and what service your car needs.
How to Use a Paper Bag to Keep Ice Off Your Windshield
Winter Winter weather (https://www.yourmechanic.com/article/how-do-i-prepare-my-car-for-winter) can make driving difficult. Snow and ice decrease visibility and cause roads to be slippery. You have to factor in extra time to warm up your car in the morning. Before you’re ready to drive, you...

Car will start and run fine, then all of a sudden die and not start, or start and die.

If the catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) is not working properly, it will cause the symptons you described, such as very poor fuel mileage, poor performance and a fuel smell as this is the raw fuel coming out of the exhaust. This...

Diagnose torque converter selenoid or transmission

Hi there. The computer could be putting the vehicle into limp mode due to an issue that may be happening and reduces the engine performance. Check the battery, alternator, and all of the sensors on the engine and make sure...

Pls I have a VW 2006 fsi Passat . I ran some diagnostics, have errors and still showing errors after clearing. However my car also stops intermittently and cannot run fast like before.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com