Audi 5000 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(148)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(148)

Car Battery Replacement Estimate for Audi 5000

Audi 5000 Car Battery Replacement costs $276 on average.

CarServiceEstimateShop/Dealer Price
1988 Audi 5000L5-2.3LService typeCar Battery ReplacementEstimate$373.15Shop/Dealer Price$468.44 - $699.19
1985 Audi 5000L5-2.2L TurboService typeCar Battery ReplacementEstimate$363.15Shop/Dealer Price$455.67 - $684.34
1981 Audi 5000L5-2.2LService typeCar Battery ReplacementEstimate$498.49Shop/Dealer Price$624.85 - $955.02
1982 Audi 5000L5-2.2LService typeCar Battery ReplacementEstimate$498.49Shop/Dealer Price$624.81 - $954.95
1987 Audi 5000L5-2.2L TurboService typeCar Battery ReplacementEstimate$363.15Shop/Dealer Price$455.70 - $684.39
1979 Audi 5000L5-2.0L DieselService typeCar Battery ReplacementEstimate$498.49Shop/Dealer Price$624.85 - $955.02
1980 Audi 5000L5-2.2LService typeCar Battery ReplacementEstimate$503.49Shop/Dealer Price$629.61 - $959.60
1982 Audi 5000L5-2.2L TurboService typeCar Battery ReplacementEstimate$503.49Shop/Dealer Price$630.26 - $960.74
Show example Audi 5000 Car Battery Replacement prices

Car Battery Replacement Service

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(148)

Rating Summary
138
5
2
1
2
138
5
2
1
2

Bryan

5 years of experience
64 reviews
Bryan
5 years of experience
Audi A4 L4-1.8L Turbo - Battery - Los Angeles, California
Bryan was awesome! Super knowledgeable and a great communicator. I definitely look forward to working with him again

Brandon

18 years of experience
275 reviews
Brandon
18 years of experience
Audi Q7 V6-3.0L Turbo - Battery - Dacula, Georgia
Brandon was excellent! He has on time and did the job in a very professional manner. If I am in need of this service in the future I will request him.

Sayeed

17 years of experience
82 reviews
Sayeed
17 years of experience
Audi A6 L4-2.0L Turbo - Car Battery Replacement - Brooklyn, New York
It was a pleasure getting my car service by Sayeed. I would recommend him whole heartedly to any and everyone for service to their vehicle. Thanks Sayeed, once again.

Scott

36 years of experience
849 reviews
Scott
36 years of experience
Audi TT Quattro L4-1.8L Turbo - Battery - Scottsdale, Arizona
Great service: fast, efficient, thorough and courteous!

Excellent Rating

(148)

Rating Summary
138
5
2
1
2
138
5
2
1
2
Number of Audi Battery Replacement services completed
1628+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

The Top Seasonal Car Repairs
Cars Cars are complex machines. The performance of your car can be affected by many factors, from the age of the car and its various parts, to how it is driven. Because of all the factors affecting your car and...
How to Replace a Brake Wheel Cylinder
The wheel cylinder on the brake system fails if the brakes are mushy, they respond poorly, or there is leaking brake fluid.
B1919 OBD-II Trouble Code: Air Bag Memory Clear Circuit Short To Battery
B1919 means there is something wrong with the Supplemental Restraint System (SRS) memory clear circuit, likely due to an electrical issue.

When going 0-20 mph I hear a knocking noise but over 20 mph no noise

Hi there. Quite often when you hear a knocking sound while accelerating and while braking, it's caused by a CV joint that is damaged or wheel bearings that are damaged. It is also possible (although unlikely) that a damaged pulley...

Check engine light is on.

First of all, a shop cannot let a vehicle leave the parking lot with the engine light on without your signature saying that you intend to leave with the light on. Second of all, the light might have been on...

Rough start but will start fine after about 5 minutes of running. Now ticking has developed.

Hi there. A ticking noise on the front of an engine that comes and goes could be the drive belt tensioner being worn, pulleys out of alignment causing the components to fail making the noise, or the timing belt tensioner...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com