Audi 5000 Quattro Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(161)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(161)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Audi 5000 Quattro Car Battery Replacement is $237 with $142 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1988 Audi 5000 QuattroL5-2.2L TurboService typeCar Battery ReplacementEstimate$398.15Shop/Dealer Price$486.44 - $711.94
1986 Audi 5000 QuattroL5-2.2L TurboService typeCar Battery ReplacementEstimate$378.15Shop/Dealer Price$466.47 - $691.99
1987 Audi 5000 QuattroL5-2.2L TurboService typeCar Battery ReplacementEstimate$378.15Shop/Dealer Price$466.47 - $691.99
1987 Audi 5000 QuattroL5-2.3LService typeCar Battery ReplacementEstimate$378.15Shop/Dealer Price$466.43 - $691.92
1988 Audi 5000 QuattroL5-2.3LService typeCar Battery ReplacementEstimate$378.15Shop/Dealer Price$466.50 - $692.04
Show example Audi 5000 Quattro Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(161)

Rating Summary
150
5
3
1
2
150
5
3
1
2

Chuy

14 years of experience
398 reviews
Chuy
14 years of experience
Audi A8 Quattro V8-4.2L - Battery - Chicago, Illinois
Very competent mechanic,thanks again.

Charles

11 years of experience
69 reviews
Charles
11 years of experience
Audi S5 V6-3.0L Turbo - Car Battery Replacement - Fort Lauderdale, Florida
Very good

Godwin

24 years of experience
253 reviews
Godwin
24 years of experience
Audi Q7 V6-3.6L - Battery - Monterey Park, California
Amazing job and super friendly and fast! He went above and beyond his job and will for sure be hiring him again for all my vehicle needs! Highly recommended!

Luis

18 years of experience
320 reviews
Luis
18 years of experience
Audi Q7 V6-3.6L - Battery - Morganville, New Jersey
Very professional, cordial and efficient. I’m more than happy to recommend Luis to anyone seeking the services of a highly skilled mechanic/car technician.

Excellent Rating

(161)

Rating Summary
150
5
3
1
2
150
5
3
1
2
Number of Audi Car Battery Replacement services completed
1771+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

The Guide to Colored Curb Zones in Arizona
Drivers Drivers in Arizona need to pay close attention to all of the various parking laws to make sure they do not leave their car in an area where it is not allowed. If you park in a prohibited area,...
How to Replace a Carburetor on Most Cars
A carburetor replacement involves the air cleaner, vacuum hose, car fuel line, and a number of other parts. This complex procedure varies by vehicle.
P0749 OBD-II Trouble Code:Transmission Fluid Pressure Solenoid Intermittent
P0749 means a voltage problem with the transmission fluid pressure control solenoid due to a faulty solenoid,or dirty or low transmission fluid

AC/Heat not working anymore

This is a common sign of a failing blower motor relay. The relay is a unit that supplies power to the heat/AC blower motor. When this relay is faulty, the blower motor may work intermittently or sometimes not at all....

Battery the car runs fine when jumped if I shut it off and try to turn it back on it will not start unless jumped

During the most recent episode when the car yet again failed to start, the diagnostic would begin with testing of the battery. If you have a fully functioning charging system (you mention the alternator is new but charging system should...

How do i know what tensioner system my car has

Unless you want to open the timing cover to check, you can give any Dodge dealer your VIN number and they can tell you which tensioner was used. With the VIN number, the dealer can tell you if your car...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com