Audi 4000 Quattro Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(5)

Fuel Injector Replacement Estimate for Audi 4000 Quattro

Audi 4000 Quattro Fuel Injector Replacement costs $693 on average.

CarServiceEstimateShop/Dealer Price
1985 Audi 4000 QuattroL5-2.2LService typeFuel Injector ReplacementEstimate$993.03Shop/Dealer Price$1243.29 - $1938.95
1984 Audi 4000 QuattroL5-2.2LService typeFuel Injector ReplacementEstimate$2200.51Shop/Dealer Price$2752.37 - $4359.06
1986 Audi 4000 QuattroL5-2.2LService typeFuel Injector ReplacementEstimate$983.03Shop/Dealer Price$1230.52 - $1924.10
1987 Audi 4000 QuattroL5-2.2LService typeFuel Injector ReplacementEstimate$983.03Shop/Dealer Price$1230.48 - $1924.03
Show example Audi 4000 Quattro Fuel Injector Replacement prices

Fuel Injector Replacement Service

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1

Jose

16 years of experience
324 reviews
Jose
16 years of experience
Audi A5 Quattro L4-2.0L Turbo - Fuel Injector - Fort Lauderdale, Florida
Jose was professional, honest and pragmatic. I would recommend him and will use him again should I have future issues with my car.

James

30 years of experience
814 reviews
James
30 years of experience
Audi A4 Quattro L4-2.0L Turbo - Fuel Injector - Orlando, Florida
He is very expert and kind

Cornelius

18 years of experience
101 reviews
Cornelius
18 years of experience
Audi Q5 L4-2.0L Turbo - Fuel Injector Replacement - Union City, Georgia
Cornelius is professional, polite, knowledgeable.

Travis

13 years of experience
548 reviews
Travis
13 years of experience
Audi A4 Quattro L4-2.0L Turbo - Fuel Injector - Forest Lake, Minnesota
Good worker and will hire again

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1
Number of Audi Fuel Injector Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

P0342 OBD-II Trouble Code: Camshaft Position Sensor Circuit Low Input
P0342 means that the camshaft position sensor circuit on engine bank 1 is sending a reading that is outside the manufacturer's settings.
Rules of the Road for All States
Following Following the “rules of the road” is important to maintain your spot as a member of the safe driving community and reducing crashes and related injuries. Traffic accidents injure and take the lives of thousands of people each...
P0563 OBD-II Trouble Code: System Voltage High
P0563 code means a voltage reading is out of the normal range due to a faulty alternator or starter, battery, voltage regulator, or wiring issues.

08 dodge ram keeps going into limp mode. new comp, cleaned tb, new crank and cam sensors, new egr and new plugs. any ideas?

Hi Steven. Thanks for contacting us today. Limp mode is generally triggered due to a fault within the driveline, such as a differential or transmission issue. The best way to get an indication as to what is causing it is...

Acceleration problem

Hi There, A number of things may cause the car to hesitate when accelerating. This is commonly caused by a faulty fuel pump, a dirty or faulty mass air flow sensor, dirty or faulty fuel injectors or in some cases...

I have a 2007 Kia spectra and it's been sitting for 2 months and my husband just went to started it wouldn't start

Hi There, It sounds like you may have a faulty starter solenoid. A faulty starter solenoid will generally produce a clicking sound when turning the key. The starter solenoid is located on the starter and has internal electrical contacts that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com