Audi 4000 Quattro Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(298)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(298)

Brake Pad Replacement Estimate for Audi 4000 Quattro

Audi 4000 Quattro Brake Pad Replacement costs $168 on average.

CarServiceEstimateShop/Dealer Price
1986 Audi 4000 QuattroL5-2.2LService typeBrake Pads - Rear ReplacementEstimate$287.29Shop/Dealer Price$361.32 - $522.76
1987 Audi 4000 QuattroL5-2.2LService typeBrake Pads - Rear ReplacementEstimate$276.29Shop/Dealer Price$347.27 - $506.43
1986 Audi 4000 QuattroL5-2.2LService typeBrake Pads - Front ReplacementEstimate$182.21Shop/Dealer Price$229.67 - $318.26
1985 Audi 4000 QuattroL5-2.2LService typeBrake Pads - Rear ReplacementEstimate$276.29Shop/Dealer Price$347.22 - $506.35
1985 Audi 4000 QuattroL5-2.2LService typeBrake Pads - Front ReplacementEstimate$182.21Shop/Dealer Price$229.70 - $318.31
1984 Audi 4000 QuattroL5-2.2LService typeBrake Pads - Rear ReplacementEstimate$276.29Shop/Dealer Price$347.27 - $506.42
1987 Audi 4000 QuattroL5-2.2LService typeBrake Pads - Front ReplacementEstimate$187.71Shop/Dealer Price$234.91 - $323.30
1984 Audi 4000 QuattroL5-2.2LService typeBrake Pads - Front ReplacementEstimate$187.71Shop/Dealer Price$235.62 - $324.56
Show example Audi 4000 Quattro Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(298)

Rating Summary
285
10
2
0
1
285
10
2
0
1

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Audi A4 Quattro L4-2.0L Turbo - Brake Pads Replacement (Front) - Oakton, Virginia
Great mechanic, we got caught in the rain and he still did his job in a good time. Definitely recommend!

Mike

13 years of experience
23 reviews
Mike
13 years of experience
Audi A3 L4-2.0L Turbo - Brake Pads Replacement (Rear) - Vista, California
Great experience!

Keith

18 years of experience
356 reviews
Keith
18 years of experience
Audi Q5 V6-3.2L - Brake Pads Replacement (Rear) - Davenport, Florida
he doing a great job

Nathan

17 years of experience
272 reviews
Nathan
17 years of experience
Audi Q5 L4-2.0L Turbo - Brake Pads Replacement (Front) - Austin, Texas
Nathan kept me informed of his arrival, efficient and professional.

Excellent Rating

(298)

Rating Summary
285
10
2
0
1
285
10
2
0
1
Number of Audi Brake Pads Replacement services completed
3278+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How Car Colors Affect Car Insurance Rates
Car paint color doesn’t affect the cost of car insurance or how often car owners are pulled over by the police.
P2041 OBD-II Trouble Code: Reductant Injector Air Press Sensor Circuit Intermittent
P2041 means there is a malfunction in the reductant injector air pressure sensor circuit. This could be due to damaged electrical components.
10 Best Stores to Buy Auto Parts in Santa Fe, New Mexico
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Santa Fe is Hal Burns Truck & Equipment

I have a 2007 Chrysler Sebring. The gear shaft is in park but the dash shows it in Drive. The car will not start now. The red ligh

The engine might not start because the neutral start safety switch "thinks" the car is in drive. There is a problem with the selector, the switch and/or the shift/gear selector cable adjustment. To figure out which of the three, the...

I installed new thermostats in my 2007 Nissan Altima 2.5l shortly after the car started to overheat so I put back the old t-stats

The best thing to do first is put the new thermostats back in the engine. Old thermostats are damaged when they come in contact with the ozone layer outside when they have been running in the engine for a long...

It's hard to fuel up; the nozzle stops and takes forever to fill up and I need to know why

This is likely related to your evaporative emissions system. The EVAP system prevents fuel vapors from the fuel tank from escaping into the atmosphere. The EVAP system collects and temporarily stores the fuel vapors in the charcoal canister. The charcoal...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com