Acura Vigor Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a Acura Vigor Fuel Pump Replacement is $472 with $101 for parts and $371 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Acura VigorL5-2.5LService typeFuel Pump ReplacementEstimate$613.13Shop/Dealer Price$680.42 - $844.73
1994 Acura VigorL5-2.5LService typeFuel Pump ReplacementEstimate$589.25Shop/Dealer Price$648.35 - $806.51
1993 Acura VigorL5-2.5LService typeFuel Pump ReplacementEstimate$589.25Shop/Dealer Price$648.47 - $806.72
Show example Acura Vigor Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Michael

9 years of experience
9 reviews
Michael
9 years of experience
Acura Vigor L5-2.5L - Car is not starting - Decatur, Georgia
Great service, was very nice and professional.

Jerel

12 years of experience
125 reviews
Jerel
12 years of experience
Acura Vigor L5-2.5L - Oil Change - Raleigh, North Carolina
Very professional and knowledgable. Will definitely use again!!

Erick

11 years of experience
182 reviews
Erick
11 years of experience
Acura Vigor L5-2.5L - Brakes, Steering and Suspension Inspection - San Jose, California

Jason

18 years of experience
429 reviews
Jason
18 years of experience
Acura Vigor L5-2.5L - Oil Change - San Jose, California
My 1993 Acura had been in desperate need for an oil change, and I have been totally dragging my feet, despite knowing better. On the evening of my appointment, Jason called me around 6:45PM, telling me that he was in the Blossom Hill area and would be a bit tardy getting to me. Sure enough, he arrived at my designated location promptly after that, and started with my vehicle. Jason was incredibly thorough, examined everything, communicated to me everything he found, and took care of the scheduled oil and filter change like a pro. Turns out that I'm gonna be in the market for a new water pump: Guess who I'm gonna book to fix it once I save up the amount? =)

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Acura Vigor services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

P2552 OBD-II Trouble Code: Throttle/Fuel Inhibit Circuit
P2552 P2552 code definition A P2552 OBD-II trouble code indicates a problem with the throttle or fuel inhibitor circuit. This is a malfunction more commonly found in diesel-powered vehicles. This code is also associated with OBD-II trouble codes P2553, P2554,...
P0423 OBD-II Trouble Code: Heated Catalyst Efficiency Below Threshold (Bank l)
P0423 P0423 code definition Heated Catalyst Efficiency Below Threshold (Bank l) What the P0423 code means P0423 is an OBD-II generic code that the engine control module (ECM) got input from the heated catalyst efficiency sensor for bank 1 that...
P0616 OBD-II Trouble Code: Starter Relay Circuit
P0616 means there is an abnormal reading from the starter relay circuit often due too a faulty ignition switch or blown fuse.

Gear shift lever broke

This is something that would need to be looked at in-person to see what is broken on the gear shifter, and scan the transmission to see what code is stored in it. You may have a complete shift linkage that...

Just got a new radiator now it's making a clicking sound

Hello and thank you for contacting YourMechanic. With the information that is given, the only thing that can make a clicking sound after installing a new radiator is a radiator fan (https://www.yourmechanic.com/services/cooling-radiator-fan-motor-replacement) is coming in contact with the radiator, the...

I just put in a new radiator and a new thermostat in my Cavalier and I'm still overheating there's no leak but my water keep disap

Anytime an engine is overheated you may warp or crack the cylinder head that may cause coolant to get into one or more of the cylinders. You should first have the cooling system pressure tested to see if the cooling...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com