Acura RL Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Acura RL Valve Cover Gasket Replacement is $268 with $72 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Acura RLV6-3.5LService typeValve Cover Gasket ReplacementEstimate$805.40Shop/Dealer Price$951.59 - $1366.04
2010 Acura RLV6-3.7LService typeValve Cover Gasket ReplacementEstimate$429.51Shop/Dealer Price$490.28 - $662.49
2011 Acura RLV6-3.7LService typeValve Cover Gasket ReplacementEstimate$429.51Shop/Dealer Price$490.34 - $662.60
2007 Acura RLV6-3.5LService typeValve Cover Gasket ReplacementEstimate$349.05Shop/Dealer Price$389.76 - $501.67
1998 Acura RLV6-3.5LService typeValve Cover Gasket ReplacementEstimate$790.08Shop/Dealer Price$935.47 - $1349.33
2009 Acura RLV6-3.7LService typeValve Cover Gasket ReplacementEstimate$429.51Shop/Dealer Price$490.68 - $663.19
2000 Acura RLV6-3.5LService typeValve Cover Gasket ReplacementEstimate$790.08Shop/Dealer Price$931.13 - $1341.74
2003 Acura RLV6-3.5LService typeValve Cover Gasket ReplacementEstimate$790.08Shop/Dealer Price$931.08 - $1341.65
Show example Acura RL Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Marco

24 years of experience
157 reviews
Marco
24 years of experience
RL 2008 - Valve Cover Gasket - Moreno Valley, CA
Very friendly and professional. My car runs great. Thank you Marco.

Marco

24 years of experience
157 reviews
Marco
24 years of experience
RL 2008 - Air Filter - Moreno Valley, CA
Very friendly and professional. My car runs great. Thank you Marco.

Marco

24 years of experience
157 reviews
Marco
24 years of experience
RL 2008 - Automatic Transmission Fluid Service - Moreno Valley, CA
Very friendly and professional. My car runs great. Thank you Marco.

Marco

24 years of experience
157 reviews
Marco
24 years of experience
RL 2008 - Brake System Flush - Moreno Valley, CA
Very friendly and professional. My car runs great. Thank you Marco.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Acura RL Valve Cover Gasket Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

P2534 OBD-II Trouble Code: Ignition Switch Run/Start Position Circuit Low
P2534 P2534 code definition A P2534 trouble code indicates that the PCM has detected a problem in the ignition switch run position circuit. Codes related to a P2534 trouble code include: P2530, P2531, P2532, P2533, P2535, P2536, P2537, and P2538....
4 Signs of a Failing AC Evaporator
A broken air conditioner may be a result of a faulty AC evaporator. Symptoms include weak air, strange odors, and fluctuating temperatures.
How Long Does an Oil Pump O Ring Last?
The The effort that goes into keeping a car in good shape is worth it. Taking the time to make sure that all of the vital components of your engine are working properly is an essential part of keeping your...

Grinding and vibration after brake work done

Hello. Thank you for writing in about your 2009 Toyota Venza. From what you are describing, I would conclude that the problem you are hearing is a result of bad rotors (https://www.yourmechanic.com/services/brake-rotor-disc-replacement) or brake pads (https://www.yourmechanic.com/services/brake-pads-replacement). Since you just had...

P0116 Code. Engine Temperature is high. Do I have air in my system? Water Pump issues?

Hi there. Check the thermostat by watching the coolant temperature gauge. When the engine gets hot and the thermostat opens up, then needle moves down a little bit. If the needle does not move and the system seems to be...

cold start issues

Hi Jim. The poor cold start may be related to a faulty/dirty IAC (idle air control) valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) not allowing engine RPM (revolutions per minute) to increase with ambient temperatures below 30 degrees. Assuming the check engine light is on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com