Volvo S60 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(225)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(225)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Volvo S60 Wheel Bearings Replacement is $224 with $84 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Volvo S60L4-2.0L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$628.96Shop/Dealer Price$751.05 - $1109.22
2015 Volvo S60L5-2.5L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$633.35Shop/Dealer Price$750.09 - $1095.36
2003 Volvo S60L5-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$327.65Shop/Dealer Price$371.46 - $498.29
2015 Volvo S60L6-3.0L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$497.29Shop/Dealer Price$580.04 - $823.29
2003 Volvo S60L5-2.5L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$486.69Shop/Dealer Price$561.92 - $777.15
2004 Volvo S60L5-2.5L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$371.45Shop/Dealer Price$416.01 - $543.40
2014 Volvo S60L6-3.0L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$497.29Shop/Dealer Price$580.06 - $823.32
2015 Volvo S60L6-3.0L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$497.29Shop/Dealer Price$580.04 - $823.29
Show example Volvo S60 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(225)

Rating Summary
214
10
0
0
1
214
10
0
0
1

Zachery

6 years of experience
14 reviews
Zachery
6 years of experience
S60 2015 - Battery - Columbus, OH
A real gentleman. Knew what needed to be done and did it. I would definitely ask for him again.

James

21 years of experience
49 reviews
James
21 years of experience
S60 2007 - Check Engine Light is on - Douglasville, GA
Jason was extremely knowledgeable, courteous and respectful. Jason was able to correct the problem without a second visit.

Michael

25 years of experience
138 reviews
Michael
25 years of experience
S60 2001 - Check Engine Light is on - Indianapolis, IN
Michael is very knowledgeable and thorough. He explained the issues with my car in a way that I could understand. I was very comfortable with his service on my car.

Christopher

5 years of experience
86 reviews
Christopher
5 years of experience
S60 2006 - Alternator - Tomball, TX
Chris is a pro all the way. He is on top of his game , personable, and honest

Excellent Rating

(225)

Rating Summary
214
10
0
0
1
214
10
0
0
1
Number of Volvo S60 services completed
2475+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

2012 Toyota Tacoma vs. 2012 Nissan Frontier: Which One Should I Buy?
The smaller truck category includes those vehicles for men (and women!) who just want to scoot around town but who are opposed to driving a small car and just prefer a truck. These relatively fuel-efficient vehicles offer little in the...
How Engine Timing Works
Your Your car engine consists of a number of rapidly moving parts, including a crankshaft, camshaft, pistons, engine valves, rods and pulleys. As the piston moves up and down, the valves move correspondingly, in and out. The crankshaft spins, and...
How Long Does a Steering Stabilizer Stop Last?
If If your truck or SUV is equipped with larger tires and wheels than the manufacturer intended, you need a steering stabilizer to reduce wobble and feedback at the steering wheel. The immense amount of weight added to the front...

No brake pressure.

Hi, no pressure on your brake pedal usually means one of two things. If you have had any work done on your brakes, it is possible that there is some air in your hydraulic lines. The air simply has to...

Obd2 scanner not linking

When the scanner will not connect, usually the first thing we look for is a blow fuse or lack of power at the OBD2 connector. The most common cause of being unable to connect to the car is an issue...

How many catalytic converters does the 2012 hyundia elantra gls 1.8 have?

Your engine should only have one in the system.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com