Volvo S60 Serpentine/Drive Belt Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Volvo S60 Serpentine/Drive Belt Replacement is $109 with $14 for parts and $95 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2002 Volvo S60L5-2.4L	Service typeSerpentine/Drive Belt Replacement	Estimate$197.57	Shop/Dealer Price$228.22 - $297.65
2003 Volvo S60L5-2.3L Turbo	Service typeSerpentine/Drive Belt Replacement	Estimate$177.57	Shop/Dealer Price$208.23 - $277.68
2014 Volvo S60L5-2.5L Turbo	Service typeSerpentine/Drive Belt Replacement	Estimate$149.17	Shop/Dealer Price$172.73 - $220.88
2003 Volvo S60L5-2.5L Turbo	Service typeSerpentine/Drive Belt Replacement	Estimate$177.57	Shop/Dealer Price$208.21 - $277.64
2001 Volvo S60L5-2.4L	Service typeSerpentine/Drive Belt Replacement	Estimate$177.57	Shop/Dealer Price$208.25 - $277.71
2004 Volvo S60L5-2.3L Turbo	Service typeSerpentine/Drive Belt Replacement	Estimate$177.57	Shop/Dealer Price$208.23 - $277.68
2002 Volvo S60L5-2.4L Turbo	Service typeSerpentine/Drive Belt Replacement	Estimate$182.57	Shop/Dealer Price$213.10 - $282.44
2005 Volvo S60L5-2.4L Turbo	Service typeSerpentine/Drive Belt Replacement	Estimate$182.57	Shop/Dealer Price$213.47 - $283.10

Show example Volvo S60 Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(7)

Rating Summary

7

0

0

0

0

7

0

0

0

0

SEE REVIEWS NEAR ME

Excellent Rating

(7)

Rating Summary

7

0

0

0

0

7

0

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

A Buyer’s Guide to the 2012 Suzuki Equator

While While the Equator is a truck very similar to others in its class – and is built on the same platform as the popular Nissan Frontier – it suffers from a lack of name recognition as well as the...

P0423 OBD-II Trouble Code: Heated Catalyst Efficiency Below Threshold (Bank l)

P0423 P0423 code definition Heated Catalyst Efficiency Below Threshold (Bank l) What the P0423 code means P0423 is an OBD-II generic code that the engine control module (ECM) got input from the heated catalyst efficiency sensor for bank 1 that...

How to Use the Ford Active Park Assist Feature

There There are few driving maneuvers as universally disliked as the parallel park (https://www.yourmechanic.com/article/how-to-park-your-car). Most people still remember that terrifying sequence of movements in their driving test. Even people who live in metropolitan areas, people who must regularly parallel park,...

loss of power. 2003 Mazda 6

Hi there, thanks for writing in. You should check to see if the timing belt (https://www.yourmechanic.com/services/timing-belt-replacement) is off or jumped, or your injectors (https://www.yourmechanic.com/services/fuel-injector-replacement) have some blockage and needs to be cleaned cleaned. Also, make sure you have a clean...

How many miles more will my 2003 Volvo S40 sedan last for?

Hello there, how long your 2003 Volvo S40 lasts is determined by many different variables. If the vehicle is maintained (https://www.yourmechanic.com/scheduled-maintenance/volvo-s40/?year=2003&mileage=90000) properly it will last much longer than a vehicle that is not maintained. It is impossible to predict how...

Oil leak and Check Engine Light is on

Hi there. Thanks for writing in. In some cases, the oil leaking from the vehicle after a rear main seal and oil cooler are repaired is caused by residual oil that was not cleaned or removed from the vehicle after...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com