Volvo S60 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(283)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(283)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volvo S60 Power Steering Pressure Hose Replacement is $442 with $260 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Volvo S60L5-2.4LService typePower Steering Pressure Hose ReplacementEstimate$1084.82Shop/Dealer Price$1257.61 - $1753.28
2004 Volvo S60L5-2.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1064.99Shop/Dealer Price$1234.18 - $1730.20
2004 Volvo S60L5-2.4LService typePower Steering Pressure Hose ReplacementEstimate$1056.59Shop/Dealer Price$1223.75 - $1713.52
2009 Volvo S60L5-2.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1282.56Shop/Dealer Price$1461.18 - $1979.89
2005 Volvo S60L5-2.4L TurboService typePower Steering Pressure Hose ReplacementEstimate$1282.56Shop/Dealer Price$1467.22 - $1990.46
2008 Volvo S60L5-2.4L TurboService typePower Steering Pressure Hose ReplacementEstimate$1282.56Shop/Dealer Price$1461.75 - $1980.90
2003 Volvo S60L5-2.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1064.99Shop/Dealer Price$1234.29 - $1730.39
2013 Volvo S60L5-2.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1067.57Shop/Dealer Price$1289.43 - $1949.57
Show example Volvo S60 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(283)

Rating Summary
268
12
0
0
3
268
12
0
0
3

Robert

22 years of experience
7 reviews
Robert
22 years of experience
Volvo S60 L5-2.5L Turbo - Door Mirror Replacement (Passenger Side) - San Antonio, Texas
Excellent job and service

Jason

16 years of experience
344 reviews
Jason
16 years of experience
Volvo S60 L5-2.5L Turbo - Check Engine Light is on - New York, New York
This guy is a pro .Lucky to have him .

AUDIE

34 years of experience
191 reviews
AUDIE
34 years of experience
Volvo S60 L5-2.5L Turbo - Door Lock Actuator Replacement (Driver Side Rear) - Las Vegas, Nevada
Very good

Jonathan

36 years of experience
522 reviews
Jonathan
36 years of experience
Volvo S60 L5-2.5L Turbo - Car is not starting - Port Richey, Florida
fast and professional service

Excellent Rating

(283)

Rating Summary
268
12
0
0
3
268
12
0
0
3
Number of Volvo S60 services completed
3113+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Heater Bypass Tube
If you see coolant leaking under your car or smell coolant from your car, you may need to replace the heater bypass tube.
How Can I Have the Vents Set to Cold Without the AC on?
The The modern automotive HVAC system offers a number of different capabilities to help keep drivers and passengers comfortable during hot or cold weather. There’s the air conditioning system, the heater, and the vent system (which doesn’t use either the...
How to Buy a Hybrid
A benefit of hybrid cars is increased fuel efficiency. A series hybrid, parallel hybrid, and mild hybrid all use electric power to improve your MPG.

Leaking out of the freeze plugs

The freeze plugs were designed to pop out if the cooling system froze, in order to prevent the engine block from getting cracked. The freeze plugs are susceptible to getting damaged from corrosion in the cooling system, and will rust...

Coolant leaked out of coolant reservoir

Leaks normally will leave a white residue or wet spot at the leak source. If the leak is not obvious a cooling system pressure test may be necessary to determine if there is a leak present. Another possibility could be...

Engine noise and has no power. It spits and sputters.

Hi there. Sounds like the fuel pump is not working in your vehicle. Check the fuel pump relay (https://www.yourmechanic.com/services/fuel-pump-relay-replacement) and see if it is clicking on when the key is turned on. If the relay is working, then turn the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com