Volvo C30 Valve Cover Gasket Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Volvo C30 Valve Cover Gasket Replacement is $1078 with $126 for parts and $952 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2009 Volvo C30L5-2.4L	Service typeValve Cover Gasket Replacement	Estimate$1315.50	Shop/Dealer Price$1405.36 - $1619.84
2011 Volvo C30L5-2.5L Turbo	Service typeValve Cover Gasket Replacement	Estimate$1375.18	Shop/Dealer Price$1452.07 - $1650.95
2007 Volvo C30L5-2.5L Turbo	Service typeValve Cover Gasket Replacement	Estimate$1251.27	Shop/Dealer Price$1328.55 - $1531.94
2013 Volvo C30L5-2.5L Turbo	Service typeValve Cover Gasket Replacement	Estimate$1375.18	Shop/Dealer Price$1452.25 - $1651.27
2010 Volvo C30L5-2.4L	Service typeValve Cover Gasket Replacement	Estimate$1254.23	Shop/Dealer Price$1342.26 - $1555.37
2012 Volvo C30L5-2.5L Turbo	Service typeValve Cover Gasket Replacement	Estimate$1375.18	Shop/Dealer Price$1453.34 - $1653.17
2010 Volvo C30L5-2.5L Turbo	Service typeValve Cover Gasket Replacement	Estimate$1243.79	Shop/Dealer Price$1319.30 - $1517.15
2007 Volvo C30L5-2.4L	Service typeValve Cover Gasket Replacement	Estimate$1254.23	Shop/Dealer Price$1332.24 - $1537.84

Show example Volvo C30 Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(27)

Rating Summary

24

1

0

1

1

24

1

0

1

1

SEE REVIEWS NEAR ME

Grzegorz

42 years of experience

473 reviews

Request Grzegorz

Grzegorz

42 years of experience

Request Grzegorz

by Tim

Volvo C30 L5-2.5L Turbo - Car is not starting - San Francisco, California

Grzegorz was very professional and friendly; my car was running with minutes and he offered helpful suggestions in case I have similar issues in the future.

Peter

44 years of experience

1397 reviews

Peter

44 years of experience

by Roberto

Volvo C30 L5-2.5L Turbo - Pre-purchase Car Inspection - Phoenix, Arizona

Thomas

13 years of experience

227 reviews

Thomas

13 years of experience

by Steven

Volvo C30 L5-2.5L Turbo - Car is not starting - Cedar Hill, Texas

Very professional and experienced

Logan

50 years of experience

82 reviews

Logan

50 years of experience

by Thomas

Volvo C30 L5-2.5L Turbo - Battery - Livermore, California

Brought the correct battery and completed the job professionally in 10 min.

Excellent Rating

(27)

Rating Summary

24

1

0

1

1

24

1

0

1

1

SEE REVIEWS NEAR ME

Recent articles & questions

How to Troubleshoot a Car that Nose Dives When Braking

Cars nose dive when the suspension is faulty. Inspect the car brake system, test the shocks and struts, and do a bounce test to diagnose the cause.

How Much Does a Mechanic Make in Massachusetts?

Automotive technician jobs in Massachusetts have an average mechanic salary of $46k, which is higher than the national average.

How Long Does an Exhaust Air Supply Tube Last?

Since Since 1966 car manufacturers have had the pressure on them to drastically reduce the amount of emissions that vehicles send out into the atmosphere. Technology has come a long way in that time, and has allowed for all kinds...

Headlights not working in 2002 Jaguar X-Type

Your car has two options for headlights. Standard halogen for high and low beam, or HID for low beam and halogen for high beam. I'm going to assume you have the HID option. The bulb itself has no filament and...

My vehicle runs or idles rough. I was told that is normal, is it? And what are the signs of the transmission going out?

With a vehicle as new as yours, the likelihood of a transmission issue would be fairly slim unless damage has been done. The clanking and the rough idle may be the cause of the jerking motion. You should turn your...

Fuel pressure

There are a number of things that may cause low fuel pressure such as a weak fuel pump, clogged fuel lines, clogged fuel filter or a bad fuel pressure regulator. This can happen when the pump itself is not working...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com