logo

Volvo 240 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(19)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Volvo 240 Wheel Bearings Replacement is $163 with $23 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Volvo 240L4-2.3LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$200.98Shop/Dealer Price$216.08 - $253.26
1992 Volvo 240L4-2.3LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$191.97Shop/Dealer Price$205.30 - $241.16
1991 Volvo 240L4-2.3LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$191.97Shop/Dealer Price$205.32 - $241.20
1993 Volvo 240L4-2.3LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$235.77Shop/Dealer Price$249.68 - $285.97
1993 Volvo 240L4-2.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$191.97Shop/Dealer Price$206.80 - $243.78
1990 Volvo 240L4-2.3LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$235.77Shop/Dealer Price$249.86 - $286.29
1993 Volvo 240L4-2.3LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$235.77Shop/Dealer Price$249.70 - $286.01
1990 Volvo 240L4-2.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$191.97Shop/Dealer Price$205.32 - $241.20
Show example Volvo 240 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Volvo 240 services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(19)
Rating Summary
18
0
0
0
1
18
0
0
0
1

Dave

24 years of experience
303 reviews
Request Dave
Dave
24 years of experience
Request Dave
by Winston
Volvo 240 L4-2.3L - Alternator - Fremont, California
Very friendly, very quick, very understanding.

Nezar

27 years of experience
102 reviews
Request Nezar
Nezar
27 years of experience
Request Nezar
by James
Volvo 240 L4-2.3L - Oil Change - Boca Raton, Florida
Just like the first time, he was early and did a great job

Nezar

27 years of experience
102 reviews
Request Nezar
Nezar
27 years of experience
Request Nezar
by James
Volvo 240 L4-2.3L - Alternator Repair - Boca Raton, Florida
It was awesome. He showed up early was friendly and knowledgeable. He finished the job in a reasonable amount of time and showed me that the work had been completed.

Nicholas

22 years of experience
354 reviews
Request Nicholas
Nicholas
22 years of experience
Request Nicholas
by Mark
Volvo 240 L4-2.3L - Brake Pads Replacement (Front) - Denver, Colorado
Arrived on time. Work was preformed efficiently and professionally..

Excellent Rating

(19)
Rating Summary
18
0
0
0
1
18
0
0
0
1
Number of Volvo 240 services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

How Long Does a Wheel Seal Last?
The The wheels of a car are very important in regards to getting the car moving. In order for the wheels of the car to move, a person will have to make sure all of the bearings and seals are...
Read more
Insurance Requirements for Car Registration in Idaho
The The state of Idaho requires that all drivers carry certain types of automotive insurance, or “financial responsibility,” in order to operate a vehicle legally. This is required whether the vehicle is registered or not. The minimum liability insurance required...
Read more
How to Register a Car in Idaho
Register your car at the Idaho DMV within 90 days. The cost is $14-$62. Provide proof of car insurance, personal identification, and a VIN inspection.
Read more

Check engine light on

Hello. When the Check Engine Light (https://www.yourmechanic.com/article/what-does-the-check-engine-warning-light-mean) is on in the dashboard, this is an indication that there is a problem that needs to be addressed. The only way to make the engine light go out permanently is to fix...
Read more

How many quarts of oil does a 94 2.5 dodge shadow take?

Hi There, Your Dodge Shadow should hold 4 quarts of oil. Should need assistance with your oil change (https://www.yourmechanic.com/services/change-oil-and-filter), please schedule an appointment with one of our experts here at YourMechanic.
Read more

No everything is normal

Read more
  1. Home
  2. Estimates
  3. Volvo
  4. 240
  5. Wheel Bearings Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE