Volkswagen Vanagon Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Volkswagen Vanagon Wheel Bearings Replacement is $152 with $12 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
Show example Volkswagen Vanagon Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Volkswagen Vanagon H4-2.1L - Pre-purchase Car Inspection - Phoenix, Arizona
Very thorough, took his time to go over his findings- very pleased!

Enrique

22 years of experience
244 reviews
Enrique
22 years of experience
Volkswagen Vanagon H4-1.9L - Pre-purchase Car Inspection - Orlando, Florida
We used Enrique for a pre-purchase inspection on an older Westfalia. He did an incredibly thorough job checking out the vehicle, taking over a 100 pictures for me to see what was going on with the car. His recommendations saved me money!

Daniel

13 years of experience
58 reviews
Daniel
13 years of experience
Volkswagen Vanagon L4-1.6L Diesel - Pre-purchase Car Inspection - Nolensville, Tennessee
Daniel did a great job inspecting a vehicle we purchased. He was very knowledgable and helpful. He was on time and everything about this service worked well.

Trevor

23 years of experience
185 reviews
Trevor
23 years of experience
Volkswagen Vanagon H4-1.9L - Car is not starting - Cardiff By The Sea, California
Trevor is professional and very knowledgeable. He was quick to diagnose our problem and fixed it. We highly recommend him!!!

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0
Number of Volkswagen Vanagon services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Use a Gas Station Car Wash
It It is inevitable that your vehicle will need to be washed, and it’s convenient to do so when you go to a gas station to fuel up. Many gas stations have a car wash on site, whether it is...
Is it Safe to Drive With an Oil Leak?
Oil lubricates the engine, and is an essential part of your vehicle. Oil reduces corrosion, helps to cool the engine, and...
All About Snow Tires
Your Your knuckles are white as you grip the steering wheel - and it’s not only because it’s cold. The wind is blowing strong from the north, polishing the roads to a deceptively dull shine. You struggle to maintain control...

Car overheated and blew out coolant

Coolant can leak from a variety of places. The system, when warm, is under pressure; 22 psi on your A4 Quattro. Even when the engine is at normal operating temperature, when a sudden leak occurs, it can “blow” everywhere. If...

While driving at night, headlights occasionally turn off, so using high beams which do work

It sounds like there is a problem with the headlamp circuit. At first, I was going to say that the headlights have a poor ground connection, but then, looking at the wiring diagram for your vehicle, I noticed the high...

Air sucking noise at low RPM during acceleration

Inspect the inlet air tube between the throttle body and the mass airflow sensor. You most likely will find that the tube may be loose, has disconnected, or has cracks in the hose itself. If it is damaged then replace...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com