Volkswagen Jetta City Camshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4,402)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4,402)

Camshaft Seal Replacement Service

How much does a Camshaft Seal Replacement cost?

On average, the cost for a Volkswagen Jetta City Camshaft Seal Replacement is $888 with $252 for parts and $636 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Volkswagen Jetta CityL4-2.0LService typeCamshaft Seal ReplacementEstimate$1273.77Shop/Dealer Price$1466.62 - $1894.38
2008 Volkswagen Jetta CityL4-2.0LService typeCamshaft Seal ReplacementEstimate$1139.77Shop/Dealer Price$1332.74 - $1760.59
Show example Volkswagen Jetta City Camshaft Seal Replacement prices

What is the Camshaft Seal all about?

Like the crankshaft, the camshaft is an essential component of the combustion process that moves your car down the road. Its motion is responsible for instigating valve movement, which regulates the air/fuel mixture that fuels the “big bang.” The camshaft uses lobes (called cams) to push against and open the valves as the camshaft rotates (springs on the valves return them to their closed position) in sync with the pistons. Note: Both valves are closed during compression and combustion so that the combustion chamber is sealed.

The camshaft seal fits between the camshaft and the cylinder head, sealing the camshaft between the top of the head and the valve cover. Like all of an engine’s internal moving parts, the camshaft must be well lubricated, essentially submerged in oil, to do its job properly. Without the camshaft seal, this lubricating oil would leak out of the engine block, befouling the engine bay and putting the engine’s internal components in danger from insufficient lubrication. It also keeps contaminants like dust and dirt from damaging the engine’s internal components.

Keep in mind:

  • Typically, camshaft seals do not need to be replaced unless other components, such as the camshaft, are being replaced.
  • Replace the timing belt when replacing the camshaft seals, and vice versa.
  • A leak from the camshaft seal or valve cover gasket are hard to tell apart if the valve cover gasket is leaking in the same area as the cam seal.

How it's done:

  • The battery is disconnected
  • The camshaft timing belt and gear is removed
  • The camshaft seal is replaced
  • The timing gear and timing belt is reinstalled
  • The battery is reconnected and timing checked and vehicle checked for leaks.

Our recommendation:

One of the most important parts of your car, the camshaft seal is made from a durable material, capable of withstanding extreme temperatures and pressures. But if it fails, replacement is the only cure. The good news is that the seal is a relatively inexpensive component, but note that replacing it can be a labor-intensive job.

What common symptoms indicate you may need to replace the Camshaft Seal?

  • Oil leaking from behind the timing cover.
  • The leak will eventually damage the car’s timing belt or cause it to slip, which will in turn throw the entire combustion process off kilter: the engine will run rough, there will be a noticeable loss of power, overheating issues, stalling and backfiring, excess smoke pouring out of the exhaust, and more.

How important is this service?

Loss of oil could cause the engine to seize, and a leak could develop into a potential fire hazard as the mixes with dirt and other contaminants. Replace the camshaft seal sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(4,402)

Rating Summary
4,131
135
31
26
79
4,131
135
31
26
79

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Volkswagen Golf L4-1.8L Turbo - Camshaft Seal - San Francisco, California
Grzegorzs is a real pro and a nice guy to boot. Very knowledgeable and meticulous in his work, and you can tell he prides himself on a job well done.

Vinny

10 years of experience
29 reviews
Vinny
10 years of experience
Volkswagen Passat L4-1.8L Turbo - Headlight Bulb Replacement (Passenger Side Low Beam) - Bellevue, Washington
Great, knowledgeable, gave a ton of advice... a pleasure to work with!

Shane

36 years of experience
39 reviews
Shane
36 years of experience
Volkswagen Jetta L4-2.0L - Other Inspections - Lacey, Washington
Shane was timely and very professional. He thoroughly diagnosed my car before acquiring the correct parts to complete the job. Thanks to Shane my car runs perfectly now. I fully recommend Shane without reservation.

John

19 years of experience
138 reviews
John
19 years of experience
Volkswagen Rabbit L5-2.5L - 110,000 Miles Maintenance Service - Round Rock, Texas
John is thorough and is very knowledgeable. More importantly he is an honest mechanic.

Excellent Rating

(4,402)

Rating Summary
4,131
135
31
26
79
4,131
135
31
26
79
Number of Volkswagen services completed
48422+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Wheel Bearing Gone?
Wheel bearings help a car roll smoothly. Bad or missing wheel bearing symptoms include grinding noises, a loose steering wheel, and uneven tire wear.
P0325 OBD-II Trouble Code: Knock Sensor Malfunction (Sensor 1, Bank 1)
P0325 code definition Knock Sensor Malfunction (Sensor 1, Bank 1) What the P0325 code means P0325 is a general ODB2 diagnostic trouble...
How to Get Smog Technician Certified in Vermont
Automotive technician jobs include smog certified emissions inspectors. In Vermont, you need to work at a testing facility.

Faulty low air pressure sensor.

The tire pressure monitoring system will only trigger a warning light for three reasons including a low tire pressure. The other two reasons are if the computer does not detect a signal from a sensor due to it being missing...

No electrical power at all!

Hey there, a couple of different things can cause the vehicle to not start and not have power. The most likely causes are a dead battery, a battery cable, or the ignition switch. For the brake lights staying on, the...

overheating at idle with new clutch fan

Inspect and verify that there is no plastic bag/trash on front of condenser or up between the radiator and condenser. Plastic ductwork around the fan are all present and intact. You should also consider whether the fan clutch an OEM...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com