Volkswagen Fox Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Volkswagen Fox Fuel Injector Replacement is $560 with $364 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Volkswagen FoxL4-1.8LService typeFuel Injector ReplacementEstimate$1974.92Shop/Dealer Price$2419.44 - $3741.66
1991 Volkswagen FoxL4-1.8LService typeFuel Injector ReplacementEstimate$1962.31Shop/Dealer Price$2404.35 - $3724.72
1990 Volkswagen FoxL4-1.8LService typeFuel Injector ReplacementEstimate$932.99Shop/Dealer Price$1117.74 - $1666.14
1993 Volkswagen FoxL4-1.8LService typeFuel Injector ReplacementEstimate$2616.83Shop/Dealer Price$3222.54 - $5033.82
Show example Volkswagen Fox Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Rodney

37 years of experience
611 reviews
Rodney
37 years of experience
Volkswagen Fox L4-1.8L - Brake System Inspection - Sacramento, California
Rodney arrived on time for the appointment and was able to diagnose the problem with my car almost immediately. He delved deeper into the area the problem was just to make sure, and his initial diagnosis was correct. He was very friendly and capable, and I look forward to booking his services for any car troubles I have in the future.

Breck

21 years of experience
681 reviews
Breck
21 years of experience
Volkswagen Jetta L4-2.0L - Fuel Injector Replacement - Spring, Texas
Breck showed up early and went straight to work. He finished sooner that what was expected. I will definitely use Breck in the future

Christian

23 years of experience
68 reviews
Christian
23 years of experience
Volkswagen Passat V6-2.8L - Fuel Injector - San Jose, California

Torrieanto

13 years of experience
632 reviews
Torrieanto
13 years of experience
Volkswagen Jetta L4-2.0L - Fuel Injector - Riverview, Florida
Torrieantos arrived on time to complete the repairs. He was courteous, knowledgeable and got the car back up and running like new.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Volkswagen Fuel Injector Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

P2128 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch "E" Circuit High Input
P2128 P2128 trouble code definition The pedal position sensor is used as an input to the engine control module (ECM) to determine the amount of torque requested by the operator. The ECM should receive an input that is within the...
P2767 OBD-II Trouble Code: Input/Turbine Speed Sensor B Circuit No Signal
P2767 means there is a problem in the input or turbine speed sensor B due to faulty sensors or solenoids, an electrical issue or transmission fluids.
How to Change Battery Cables
Although simple in nature, battery cables (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-battery-cable) are one of the most important components of a vehicle’s electrical system. They serve as...

Lights won't turn off

This is an issue with the electronic system, which is controlled by computers such as a (BCM) body control module. The correct voltages and inputs have to be in order or issues like this can happen. The first step is...

After fuel pump replacement, no power getting to fuel pump - 1991 Toyota Supra Automatic

I would start with clearing the security issue, because utilizing the wrong key (or a bad door sensor) can disable the fuel injection and fuel pump once the security system arms, as your mechanic notes. Once the security system is...

Cylinder number 4 is misfiring black dry carbon on spark plug code P0304

Hi there. It would appear you have covered all the bases replacing components for your P0304 (https://www.yourmechanic.com/article/p0303-obd-ii-trouble-code-cylinder-3-misfire-detected-by-spencer-clayton) engine misfire. As you already know, replacing components can be expensive and time consuming without resolution. Assuming the engine is mechanically sound, good...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com