Toyota MR2 Spyder Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(31)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(31)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Toyota MR2 Spyder Car Battery Replacement is $295 with $155 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Toyota MR2 SpyderL4-1.8LService typeCar Battery ReplacementEstimate$464.84Shop/Dealer Price$545.90 - $780.98
2005 Toyota MR2 SpyderL4-1.8LService typeCar Battery ReplacementEstimate$455.83Shop/Dealer Price$535.12 - $768.88
2001 Toyota MR2 SpyderL4-1.8LService typeCar Battery ReplacementEstimate$455.83Shop/Dealer Price$535.15 - $768.92
2004 Toyota MR2 SpyderL4-1.8LService typeCar Battery ReplacementEstimate$455.83Shop/Dealer Price$535.15 - $768.92
2000 Toyota MR2 SpyderL4-1.8LService typeCar Battery ReplacementEstimate$455.83Shop/Dealer Price$536.62 - $771.50
2002 Toyota MR2 SpyderL4-1.8LService typeCar Battery ReplacementEstimate$455.83Shop/Dealer Price$535.29 - $769.17
Show example Toyota MR2 Spyder Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(31)

Rating Summary
29
1
1
0
0
29
1
1
0
0

Luis

10 years of experience
140 reviews
Luis
10 years of experience
Toyota MR2 Spyder L4-1.8L - Car is not starting - Lodi, New Jersey
Great Service will deff use again.

Andrian

33 years of experience
185 reviews
Andrian
33 years of experience
Toyota MR2 Spyder L4-1.8L - Check Engine Light is on - Pembroke Pines, Florida
Knowledgeable and personable. Did not try to oversell.

Joe

44 years of experience
838 reviews
Joe
44 years of experience
Toyota MR2 Spyder L4-1.8L - Oil Change - Saint Petersburg, Florida

Andrian

33 years of experience
185 reviews
Andrian
33 years of experience
Toyota MR2 Spyder L4-1.8L - Pre-purchase Car Inspection - Hallandale, Florida
Prompt, courteous, thorough— an excellent job. Purchasing a used, 2001 vehicle 700 miles away. Put my mind at ease. Menes well spent.

Excellent Rating

(31)

Rating Summary
29
1
1
0
0
29
1
1
0
0
Number of Toyota MR2 Spyder services completed
341+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

When Should I Rotate My Tires?
Refer Refer to your owner's manual for the exact tire rotation schedule for your car. The general recommendation is that tires be rotated every 5,000 to 8,000 miles, and this often coincides with oil changes. Consider exploring an in depth...
P2141 OBD-II Trouble Code: Exhaust Gas Recirculation Throttle Control Circuit Low
P2141 P2141 code definition Exhaust Gas Recirculation Throttle Control Circuit Low What the P2141 code means P2141 is an OBD-II generic code for the engine control module (ECM) detecting the exhaust gas recirculation (EGR) control valve circuit is low. This...
New Media to Listen to in the Car
Whether you face a long commute every day or are planning a road trip, consider the following recommendations for audio entertainment.

Dash showing "Check Brake System" and "Service Advance Trac" after trouble code deleted.

You can try to do a battery reset to see if it helps but I would think that you will need to have a scanner that can access the ABS and traction control system so you can see why the...

Car is making a squeaking/ rubbing sound upon acceleration and deceleration

Hi there. It's more than likely that your serpentine belt or one of the pulley's is loose or worn out. Usually this will cause the type of sound you are hearing. However, it's also possible that a wheel bearing is...

The 8th digit to my honda civic LX sedan is 5, its a single overhead cam, 1.8A engine, what are the timing marks?

Here is the directions for replacing the timing chain. The manual groups all 1.8 engines together and you will need to pick the one that is for your engine in the timing chain instructions. (https://www.dropbox.com/s/xsdbtde3mw1vd39/2015%20honda%20civic%20timing%20chain.pdf?dl=0)

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com