Toyota Echo Tie Rod End Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(99)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(99)

Tie Rod End Replacement Service

How much does a Tie Rod End Replacement cost?

On average, the cost for a Toyota Echo Tie Rod End Replacement is $163 with $68 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Toyota EchoL4-1.5LService typeTie Rod End - Front Left Outer ReplacementEstimate$279.95Shop/Dealer Price$331.19 - $462.41
2000 Toyota EchoL4-1.5LService typeTie Rod End - Rear Right Inner ReplacementEstimate$506.14Shop/Dealer Price$605.22 - $857.37
2001 Toyota EchoL4-1.5LService typeTie Rod End - Front Right Inner ReplacementEstimate$420.65Shop/Dealer Price$510.71 - $756.09
2003 Toyota EchoL4-1.5LService typeTie Rod End - Rear Right Inner ReplacementEstimate$325.24Shop/Dealer Price$379.05 - $495.48
2003 Toyota EchoL4-1.5LService typeTie Rod End - Rear Left Inner ReplacementEstimate$325.24Shop/Dealer Price$379.12 - $495.62
2005 Toyota EchoL4-1.5LService typeTie Rod End - Rear Right Inner ReplacementEstimate$325.24Shop/Dealer Price$379.09 - $495.56
2003 Toyota EchoL4-1.5LService typeTie Rod End - Rear Right Outer ReplacementEstimate$264.95Shop/Dealer Price$316.07 - $447.20
2005 Toyota EchoL4-1.5LService typeTie Rod End - Front Left Outer ReplacementEstimate$264.95Shop/Dealer Price$316.44 - $447.86
Show example Toyota Echo Tie Rod End Replacement prices

What are tie rod ends and how do they work?

Your car’s steering rack or gearbox (depending on the vehicle) is bolted in a fixed position to the frame of your vehicle. But the car’s wheels move up and down to smooth out road irregularities, and also left and right as you turn the steering wheel. The tie rod end is connected between the track rod of the steering assembly and the steering knuckle. A tie rod has a ball-and-socket joint to accommodate these movements. Cars will typically have two tie rod ends on each side: one inner tie rod end and one outer tie rod end — four total with a set of two per side. Tie rod ends are usually permanently greased but some may have Zerk fittings for re-greasing, including aftermarket ones. Tie rod ends are adjustable and accuracy is critical for proper front wheel alignment.

When to consider replacing tie rod ends:

  • Vehicle wandering, pulling, or premature tire wear out. Loose tie rod ends may cause the vehicle to not track straight ahead. You may also notice excessive tire wear on the front tires.
  • Missing, damaged, or leaking rubber boot or bellows. The grease in an outer tie rod end is retained by a rubber seal. If the seal has failed, the grease will leak out and the joint will be contaminated and worn down by road dirt. Inner tie rod ends are protected by extensible bellows. If the bellows has torn and is noticed early, only it needs to be replaced.
  • Obvious looseness in the component. Mechanics use specified tests to determine if there is wear in a tie rod end. For example, the resistance to turning of the ball stud in the outer tie rod end can be measured and compared against the original equipment manufacturer’s (OEM) specifications. However, without the use of any instruments, any detectable play in the ball stud indicates the tie rod end must be replaced. Excessive play will also make it impossible to properly set toe alignment.
  • Clunking noises, lack of smooth steering. Noise from the suspension on turning, or binding when you turn the steering wheel, could be due to tie rod end defects. Steering rack or power steering assist problems can account for these problems too.

How do mechanics replace tie rod ends?

  • The vehicle is jacked up and supported on steel safety stands.
  • The tire and wheel assembly is removed.
  • If possible, the existing tie rod end length is measured and recorded. Installing the new tie rod at the same length as the old helps in the alignment process.
  • The tie rod end adjusting lock nut or sleeve is loosened. Then, a tie end removal tool is used to separate the tie rod ball stud from the steering knuckle. The tie rod is then unthreaded from its connection to the inner tie rod end.
  • On a rack and pinion type steering system, if an inner tie rod end is being replaced, the tie rod steering shaft boot is removed and the tie rod unthreaded from the steering rack and the outer tie rod end.
  • New tie rod ends are installed with all fasteners and the adjusting lock nut tightened to the required OEM torque value. During installation, the length recorded during removal is applied to aid the later wheel alignment process.
  • With only a few exceptions, anytime a suspension component is removed and replaced on your car, the vehicle alignment must be inspected, measured, and adjusted to factory specifications. Using portable equipment, some mobile mechanics can perform a mobile alignment at your location. More likely though, the final step will be a trip to a local alignment shop for measurement, and adjustment as needed, of the vehicle alignment.

Is it safe to drive with a tie rod end problem?

No. Tie rods ends are a critical mechanical linkage in the steering system. If a known problem exists, such as wear, looseness, or binding, the possibility of sudden and unpredictable breakage of the tie rod remains, which would cause loss of steering control. Consequently, it is not safe to drive the car if the tie rod ends have a known deficiency. Tie rod ends should always be inspected per the maintenance schedule.

When replacing tie rods keep in mind:

  • It is recommended to replace tie rod ends in pairs. There are four tie rod ends on most vehicles. The outer tie rod ends — one per side — are most susceptible to wear and failure. If one outer tie rod end has failed, the other is probably not far behind.
  • After the repair is performed the vehicle must be aligned, either on a mobile basis or at a good alignment shop.
  • A good alignment job will provide you with pre and post-alignment printouts of your car’s alignment settings. A good shop will set the alignment to the “preferred” factory setting, not just the “allowed” settings. A job well-done will also have performed a careful inspection of the suspension beforehand to ensure the new alignment remains durable and stable. The best alignment results will be achieved if the tires on your car are not unevenly worn.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(99)

Rating Summary
96
2
0
0
1
96
2
0
0
1

Francisco

10 years of experience
174 reviews
Francisco
10 years of experience
Toyota Echo L4-1.5L - Fuel Pump - Lake Forest, California
He was on time, efficient and seemed to care about doing a good job!

Jay

37 years of experience
947 reviews
Jay
37 years of experience
Toyota Echo L4-1.5L - Blower motor in op at times intermittently inspection - Riverside, California
Jay was very kind and on time upon arrival at my work and explained every detail on what the problem was with my blower motor switch on the dash. Very fast, honest hard worker. I will definitely be booking Jay for any future car problems that arise.

Anthony

17 years of experience
39 reviews
Anthony
17 years of experience
Toyota Echo L4-1.5L - Oil Change - Antioch, California
Arrived early (big plus) Friendly, very easy to talk to, answered all my questions ( I had a lot of them), was done in a jiff. Thank You Anthony.

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Toyota Echo L4-1.5L - Oil Change - Antioch, California
Like I stated before Josh was/is great. Answered all my questions, talked me through what he was doing as he was doing it. I feel very confident in his ability to keep my car in top running condition from now on.

Excellent Rating

(99)

Rating Summary
96
2
0
0
1
96
2
0
0
1
Number of Toyota Echo services completed
1089+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1600+
experts on our platform

Recent articles & questions

What Are the Benefits of an Aftermarket Exhaust System?
All All cars must have an exhaust system in order to vent gases from the engine. However, your car’s stock exhaust system probably isn’t all it could be. Automakers are required to make a number of trade-offs to ensure that...
A Buyer’s Guide to the 2012 Ford F-450
The The 2012 Ford F-450 is a serious truck with major towing and hauling capacity. What it lacks in gas mileage, it more than makes up for in durability, suspension, power, and torque. Plus, with a six-speed shiftable automatic transmission,...
P0441 OBD-II Trouble Code: Evaporative Emission Control System Incorrect Purge Flow
P0441 code definition The P0441 diagnostic trouble code will be set when a malfunction is detected within the EVAP control circuit. This...

valve body swap from a 5R44E to a 4R44E.

Yes you can swap out the valve bodies as they will bolt right up, however, the computer will need to be replaced for the transmission controller as it is programmed for a 5 speed and not a 4 speed. The...

Jeep Grand Cherokee loses power when accelerating breaks up like the fuel is deprived.

Hello and thanks for writing in. I believe you are headed in the right direction. I would suggest checking the MAP sensor (https://www.yourmechanic.com/services/manifold-absolute-pressure-sensor-map-sensor-replacement) as well as fuel pressure to be sure that all fuel injectors (https://www.yourmechanic.com/services/fuel-injector-replacement) are firing properly and...

on my bmw the engine malfunction light came on plus the warning message engine malfunction reduced engine power displayed and sin

You will need to have the computer scanned for failure codes since there may be over 100 possible codes that will point to the cause of the problem. You will then have a better idea why the vehicle will not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com