Toyota Echo Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(106)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(106)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Toyota Echo Power Steering Pressure Hose Replacement is $845 with $663 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Toyota EchoL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$1527.28Shop/Dealer Price$1863.41 - $2861.25
2003 Toyota EchoL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$1515.57Shop/Dealer Price$1849.40 - $2845.52
2004 Toyota EchoL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$1515.57Shop/Dealer Price$1849.43 - $2845.58
2000 Toyota EchoL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$1515.57Shop/Dealer Price$1849.43 - $2845.57
2005 Toyota EchoL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$1515.57Shop/Dealer Price$1851.34 - $2848.93
2001 Toyota EchoL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$1515.57Shop/Dealer Price$1849.61 - $2845.89
Show example Toyota Echo Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(106)

Rating Summary
103
2
0
0
1
103
2
0
0
1

Adam

18 years of experience
124 reviews
Adam
18 years of experience
Toyota Echo L4-1.5L - remove and replace the charcoal canister - Conroe, Texas

John

37 years of experience
565 reviews
John
37 years of experience
Toyota Echo L4-1.5L - Pre-purchase Car Inspection - Sacramento, California
Great insight, appreciated his perspective on checking out a used vehicle I am considering to buy.

Chris

21 years of experience
448 reviews
Chris
21 years of experience
Toyota Echo L4-1.5L - Oil Change - Portland, Oregon
Chris was polite and worked quickly.

Andrew

13 years of experience
29 reviews
Andrew
13 years of experience
Toyota Echo L4-1.5L - Brake Pads Replacement (Front) - Fort Myers, Florida
This will be my third service done by Andrew. Very pleased with him and his work. Will continue to use his services.

Excellent Rating

(106)

Rating Summary
103
2
0
0
1
103
2
0
0
1
Number of Toyota Echo services completed
1166+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

P2078 OBD-II Trouble Code: Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit High
P2078 P2078 code definition Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit High What the P2078 code means This code will set if the Engine Control Module (ECM) (https://www.yourmechanic.com/parts/engine-control-module), or Powertrain Control Module (PCM), detects a problem with the position...
Veteran and Military Driver Laws and Benefits in Texas
The The Lone Star State offers veterans and current military service people a number of benefits and perks, but there are also a number of important laws and regulations that must be followed when obtaining a license. Let’s consider some...
How to Determine the Total Interest Paid on a Car Loan
An An important aspect of any vehicle loan is the amount of interest you pay. If you want to compare loans to see which one is the better deal or just figure out how much interest you’ve paid in for...

Emergency brake light on

The red brake light is primarily lit when you apply the emergency brake, but it also lights up when you have a hydraulic problem with the brakes. Things like low fluid levels, leaking wheel cylinders, or brake hoses can also...

My car is showing two trouble codes: P1639 and PO452

Hello. The diagnostic codes (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) you are receiving may be a result of both sensors failing, or a power supply issue. The code P1639 stands for an A/C refrigerant pressure sensor voltage shortage. The second code P0452 (https://www.yourmechanic.com/article/p0452-obd-ii-trouble-code-evaporative-emission-control-system-pressure-sensor-low-input-by-logan-utsman) stands for...

Hi! I've got a 2004 honda civic and multiple codes have showed up. Crank sensor, or sensor, throttle position, and system is too lean. I decided to check after the car showed symptoms of stalling for half a second as I was driving.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com