Toyota Corolla iM Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(57)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(57)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Toyota Corolla iM Brake Master Cylinder Replacement is $468 with $286 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Toyota Corolla iML4-1.8LService typeBrake Master Cylinder ReplacementEstimate$772.84Shop/Dealer Price$920.36 - $1352.37
2017 Toyota Corolla iML4-1.8LService typeBrake Master Cylinder ReplacementEstimate$877.92Shop/Dealer Price$1024.60 - $1456.00
Show example Toyota Corolla iM Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(57)

Rating Summary
53
2
0
1
1
53
2
0
1
1

ALEX

24 years of experience
43 reviews
ALEX
24 years of experience
Toyota Corolla iM L4-1.8L - Brake Pads Replacement (Rear) - Sacramento, California
Show up early, very pollite and excellent job. Alexs save my time. Thank you very much.

TJ

27 years of experience
362 reviews
TJ
27 years of experience
Toyota Corolla iM L4-1.8L - Brake Pads Replacement (Front) - Venice, Florida
Nicest man. So professional. Will recommend TJ to everyone I know that needs a mechanic.

Richard

22 years of experience
237 reviews
Richard
22 years of experience
Toyota Corolla L4-1.8L - Brake Master Cylinder Replacement - Naples, Florida
This was my first experience with "your mechanic" and it has been great. Richard showed up on time and brought the parts needed with him. He was quick to do the job and the brakes work now better than ever before. The best of it is that the job was done hundreds of Dollars cheaper than what a local repair shop had quoted me. Highly recommend, I will use the service again any time there is a problem with the car.

James

32 years of experience
705 reviews
James
32 years of experience
Toyota Sequoia V8-4.7L - Brake Master Cylinder - Orange, California
Arrived quickly, got the job done in a professional manner, was polite. Would work with again.

Excellent Rating

(57)

Rating Summary
53
2
0
1
1
53
2
0
1
1
Number of Toyota Brake Master Cylinder Replacement services completed
627+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Automatic Shutdown Relay
Common signs include the car starting but stalling immediately, the Check Engine Light turning on, and the engine not cranking when turning the key.
Can a Leak in the Brake System Cause Total Brake Failure?
Although Although there are several issues that can lead to total brake failure, the most common one is some form of brake fluid leak. When a brake leak is present, it affects the fluid pressure in your system. Since it...
What Do Dealer Warranties Typically Include?
When When searching for a new or used automobile, having a warranty can be a real game changer. Having a warranty, especially on used vehicles, can give you a cushion to fall back on if your luck were to go...

Car starts, but doesn't stay started.

The problem you describe can be the crankshaft position sensor. The sensor is a major failure on these vehicles and can cause no starts or intermittent starts and stalls. Have a qualified mechanic test you car with an approved scanner...

Large EVAC leak.

Hello. If the gas cap is verified to be good, the most common culprits are the purge valve and charcoal canister. If you would need help having this checked, a certified technician from YourMechanic can come to your car's location...

1998 mercedes benz c280 transmission fluid leak from top

Hi there. Unfortunately, we are not able to receive pictures or video to pinpoint damage or identify parts for vehicles through this platform. The best way to identify this item is to search online for a detailed schematic of your...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com