Toyota Corolla Cross Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,750)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,750)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Toyota Corolla Cross Brake Pad Replacement is $220 with $80 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2023 Toyota Corolla CrossL4-2.0L HybridService typeBrake Pads - Rear ReplacementEstimate$345.88Shop/Dealer Price$390.17 - $513.32
2023 Toyota Corolla CrossL4-2.0LService typeBrake Pads - Rear ReplacementEstimate$335.07Shop/Dealer Price$377.24 - $498.80
2022 Toyota Corolla CrossL4-2.0LService typeBrake Pads - Rear ReplacementEstimate$305.87Shop/Dealer Price$347.70 - $469.00
2024 Toyota Corolla CrossL4-2.0LService typeBrake Pads - Front ReplacementEstimate$335.07Shop/Dealer Price$377.27 - $498.85
2022 Toyota Corolla CrossL4-2.0LService typeBrake Pads - Front ReplacementEstimate$305.87Shop/Dealer Price$349.17 - $471.58
2024 Toyota Corolla CrossL4-2.0L HybridService typeBrake Pads - Front ReplacementEstimate$335.07Shop/Dealer Price$377.44 - $499.14
2024 Toyota Corolla CrossL4-2.0LService typeBrake Pads - Rear ReplacementEstimate$335.07Shop/Dealer Price$377.29 - $498.88
2023 Toyota Corolla CrossL4-2.0LService typeBrake Pads - Front ReplacementEstimate$335.07Shop/Dealer Price$377.27 - $498.85
Show example Toyota Corolla Cross Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(1,750)

Rating Summary
1,678
52
6
7
7
1,678
52
6
7
7

David

17 years of experience
639 reviews
David
17 years of experience
Toyota Sienna V6-3.5L - Brake Pads Replacement (Front, Rear) - Fairfield, California
David was very prompt and professional. Did the work I requested exactly as requested, also explained a few things to me in a way that made sense to me. This is my second time using David and I will definitely seek to use him in the future!

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Toyota Highlander V6-3.0L - Brake Pads Replacement (Front, Rear) - Denver, Colorado
Very professional, will answer your concerns with patiance, willing to share his knowledge

Sillia

19 years of experience
21 reviews
Sillia
19 years of experience
Toyota Sienna V6-3.0L - Brake Pads Replacement (Front) - Alpharetta, Georgia
Sillia was quick and efficient, and showed me pictures of things on my car that needed attention. I felt informed about what needs to be done to my car, and what was done to my car. I will be definitely be coming Sillia again!

Mark

12 years of experience
349 reviews
Mark
12 years of experience
Toyota Prius L4-1.8L Hybrid - Brake Pads Replacement (Rear) - San Jose, California
Very professional, and honest. He seemed knowledgable of Toyota Prius brake system as well, and offered personal follow up support for any future recurring problem with his job done. Will definitely call again.

Excellent Rating

(1,750)

Rating Summary
1,678
52
6
7
7
1,678
52
6
7
7
Number of Toyota Brake Pad Replacement services completed
19250+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Clean Liquid Spills on Car Upholstery
As As careful as you may try to be in your car, there’s a good chance you’re going to experience a spill at some time or another. The only surefire way to prevent a spill is to never have food,...
How to Find the Source of a Coolant Leak Faster and More Accurately
Keeping a good coolant level in your car is necessary to avoid overheating. If you think there is a leak, find where it's coming from to fix it.
Top 10 Scenic Drives in Nebraska
The state of Nebraska is the epitome of America’s Midwest with historical markers and scenery that evokes memories of the Old West. Vast grassy prairies dominate the scene, inspiring a sense of hope and an inquisitiveness about the unknown. There...

Not starting MAP/MAF

There are a number of Sprinter-specific issues to check here: make sure power door lock fuse (https://www.yourmechanic.com/services/fuse-replacement) isn't blown (safety interlock), check glow plug module (https://www.yourmechanic.com/services/glow-plugs-replacement), and make sure the ignition key hasn't lost its security setting (try an alternate,...

Installed new delphi fuel pump and fram fuel filter. still no pressure on fuel rail valve and wont start. 2003 Chevrolet Tahoe

Hi there - I suspect you have weak power getting to the fuel pump. I would first check the voltage coming out of the fuel pump relay (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-pump-relay). If the contacts in the relay are burned, you will not get...

I have a 2012 chevy malibu eco, the roads are currently icy. On my way to work i noticed my back passenger tire had a pressure of 20 and then got a SERVICE STABILI TRAK warning and light as well as a warning for SERVICE BRAKE ASSIST and light. Could those warnings be related because of the tires starting condition mixed with the road conditions

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com