Suzuki SX4 Crossover Car Starter Repair at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(24)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(24)

Car Starter Repair Service

How much does a Car Starter Repair cost?

On average, the cost for a Suzuki SX4 Crossover Car Starter Repair is $428 with $288 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Suzuki SX4 CrossoverL4-2.0LService typeCar Starter RepairEstimate$730.06Shop/Dealer Price$877.43 - $1311.42
Show example Suzuki SX4 Crossover Car Starter Repair prices

What's a car starter motor and how does it work?

The starter motor is a powerful, compact electric motor that will turn a car’s engine over at about 200 RPM in order to start the engine. The starter is at the terminus of a circuit that includes the battery, the ignition switch, a neutral safety switch, relays and fuses.

When you turn the ignition key to start, or press the start button in some vehicles, the starter circuit is completed and the starter will run. Most starters have a small pinion gear that engages a larger ring gear on the flywheel when the starter is powered on. The pinion gear turns the engine flywheel at about 200 RPM. Since the flywheel is directly connected to the crankshaft, all engine components will then turn in sync and the engine starts.

Starter

When to replace the starter?

Starters are relatively durable but most will eventually fail in one or more of the following ways:

  • Intermittent operation of the starter. Starters can develop bad spots on the armature which will cause intermittent operation. This causes the starter to work sometimes and other times when you turn the key nothing happens.
  • Starter turns too slowly. Internal electrical and mechanical faults can cause the starter to draw too much current and in some cases the current drawn will exceed what the battery can supply. A consequence is the engine may not start as rapidly.
  • Unusual noises on starting. If you hear any type of grinding or other unusual noise while starting the engine, that should be investigated as the noise could reflect an internal starter failure or the noise could be due to pinion gear failure or flywheel ring gear damage.
  • Starter doesn’t function when turning the key. In some cases, the first symptom of a starter malfunction is a complete failure of the starter motor. This happens when you turn the ignition key to start the car, the starter motor does not function at all.

How do mechanics repair the starter?

  • If the starter is determined to be faulty, the battery must be disconnected prior to commencing any work. Once the battery is disconnected, the wiring to the starter is disconnected.
  • Starters are bolted to the engine block or the transmission case. Generally, there are two bolts. The procedure to access the starter varies across car models and can require removal, or lowering, of other vehicle components.
  • Once the starter is removed and a new starter is installed, the mounting bolts are tightened to the OEM factory torque specifications, the electrical connections are cleaned and re-attached to the starter and the starter is tested to confirm normal operation.

Is it safe to drive with a starter problem?

Once a vehicle engine is running, the starter is not in use. However, if you know that the starter is malfunctioning or working intermittently, you may be left stranded if you turn the engine off and the starter doesn’t function when restarting the engine. Should you know or suspect a problem with the starter, it is best to have the problem repaired to avoid being left stranded.

When replacing a faulty starter keep in mind:

  • Prior to replacing the starter, simple diagnostic tests should be performed to ensure that the problem is a faulty starter versus a weak battery, faulty neutral start switch, or other faulty electrical component in the starter motor circuit.
  • Starters draw large amounts of current from the battery, much more than any other electrically powered device in your car. This makes it important that the electrical connections to the battery are inspected, cleaned, and tightened as necessary. Cables to the starter should also be inspected for corrosion and replaced as needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(24)

Rating Summary
23
1
0
0
0
23
1
0
0
0

Michael

13 years of experience
65 reviews
Michael
13 years of experience
Suzuki Kizashi L4-2.4L - Starter - Norcross, Georgia
He showed up early, did the requested service very competently and gave a proper diagnosis on the vehicle, told me exactly what it needs

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Suzuki Esteem L4-1.8L - Starter - Corona, California
Jay Unger repaired my older model vehicle with no problem. I have been told by others it would not be wise to fix the car based on the year and mileage of my vehicle but for under $700 my car was repaired and running like new. It sure saved going out and buying a new car with payments or buying a vehicle with potentially worse problems. He was very professional, was timely and explained everything that was wrong, what he did as to the repairs and what may be needed for future repairs. I would call YourMechanic again and ask for Jay Unger to repair my car anytime. Having the work done at home saved me drive time and down time.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Suzuki Samurai L4-1.3L - Starter - Lake Elsinore, California
Quick and easy! Knows his craft, he will be my mechanic from on.

Dustin

13 years of experience
12 reviews
Dustin
13 years of experience
Suzuki XL-7 V6-3.6L - Starter - Denver, Colorado
Dustin came 20 minutes early and was very friendly and professional. I would recommend this service to others.

Excellent Rating

(24)

Rating Summary
23
1
0
0
0
23
1
0
0
0
Number of Suzuki Car Starter Repair services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How Much Does a Mechanic Make in Texas?
Automotive technician jobs in Texas have an average mechanic salary of $41k, with some mechanics earning a salary of $65k.
How to Use GPS in Your Car
An An in-car navigation device, or Global Positioning System GPS (https://www.yourmechanic.com/article/3-essential-things-to-know-about-your-car-s-gps) device, helps you find your way to various destinations. In addition to guiding you on the streets and highways, newer GPS models also give you the ability to search...
How to Buy a Good Quality Wheel Speed Sensor
For For vehicles that have anti-lock brakes, the wheel speed sensor plays an important role. They work together with the electronic stability control system that is found on so many vehicles today. This wheel speed sensor is responsible for keeping...

Car squeaking when driving

Hello. I will assume your vehicle is equipped with a manual transmission as it sounds like you are shifting gears yourself. The symptoms you've given are leading me to a malfunction in your clutch assembly, or engine and transmission assembly...

Where is the crankshaft position sensor location

Hey there, thanks for writing in. The sensor is on the right rear of the engine block behind the exhaust manifold heat shield. If you need help replacing the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement), a certified technician from YourMechanic can come...

I have a 2008 lincoln mkz. I ran the codes and am getting a o2 bank 4 sensor 4. I can't even find anything online that says my car

Hi there. From what I am aware of, there isn't a bank 4 sensor 4 on this vehicle or other Ford products. There are four total O2 sensors, (two upstream and two downstream), so the code you are getting might...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com