Suzuki Swift Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(462)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(462)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Suzuki Swift Fuel Injector Replacement is $1135 with $1040 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Suzuki SwiftL4-1.3LService typeFuel Injector ReplacementEstimate$2513.47Shop/Dealer Price$3123.09 - $4929.45
1993 Suzuki SwiftL4-1.3LService typeFuel Injector ReplacementEstimate$2708.42Shop/Dealer Price$3360.82 - $5277.42
1994 Suzuki SwiftL3-1.0LService typeFuel Injector ReplacementEstimate$2255.34Shop/Dealer Price$2794.46 - $4371.26
1995 Suzuki SwiftL4-1.3LService typeFuel Injector ReplacementEstimate$2493.47Shop/Dealer Price$3103.09 - $4909.44
1992 Suzuki SwiftL4-1.3LService typeFuel Injector ReplacementEstimate$2708.42Shop/Dealer Price$3360.84 - $5277.47
1992 Suzuki SwiftL4-1.6LService typeFuel Injector ReplacementEstimate$2250.96Shop/Dealer Price$2788.99 - $4362.50
1992 Suzuki SwiftL3-1.0LService typeFuel Injector ReplacementEstimate$2264.34Shop/Dealer Price$2803.22 - $4379.83
1989 Suzuki SwiftL4-1.3LService typeFuel Injector ReplacementEstimate$2717.42Shop/Dealer Price$3370.24 - $5287.16
Show example Suzuki Swift Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(462)

Rating Summary
433
20
1
2
6
433
20
1
2
6

William

20 years of experience
129 reviews
William
20 years of experience
Suzuki Swift L4-1.3L - Car is hard to shift - Cape Coral, Florida
Saved me a lot of time and money I would use him again!

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Suzuki Reno L4-2.0L - Fuel Injector - Houston, Texas
Very professional

Todd

40 years of experience
1 reviews
Todd
40 years of experience
Suzuki SX4 L4-2.0L - Alternator - Savannah, Georgia
Incredibly Professional, Easy to talk to and brilliant. If I could give him 10 stars I would. Never met someone who knew so much and could explain it all so easily. Highly recommended 10/10.

Lee

34 years of experience
66 reviews
Lee
34 years of experience
Suzuki Grand Vitara V6-2.5L - Fan Clutch - Marietta, Georgia
Lee was great! Fast, efficient and friendly! I will definitely be using him again!

Excellent Rating

(462)

Rating Summary
433
20
1
2
6
433
20
1
2
6
Number of Suzuki services completed
5082+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Does a Brake Drum Last?
The front and rear brakes on a car take a lot of abuse over time. On most older vehicles, the front brakes will...
How to Transfer a Car Title in Wisconsin
The The state of Wisconsin requires that the title to a vehicle be transferred anytime there is a change in ownership. This would include buying or selling the car, inheriting a car, and donating or gifting a car. There are...
Veteran and Military Driver Laws and Benefits in Nevada
The The state of Nevada offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. License and registration tax and fee exemption...

I cannot get the fluid out of the calipers.

Your brake system (which includes ABS) has check valves and accumulator chambers between the master cylinder and the calipers. It will be necessary to use a pressure bleeder to overcome these "restrictions." Gravity flow or a vacuum bleeder at the...

Replace washer fluid sensor on 2012 tahoe

Hi there. If you're going to attempt to replace the windshield wiper fluid sensor, I would strongly recommend purchasing a service and repair manual for your 2012 Chevrolet Tahoe, as it will provide you detailed step-by-step instructions; along with diagrams...

My mercedes c300 says collision prevention assist plus inoperative

The warning light means there is an electrical malfunction in the collision avoidance system and that could involve sensors, wiring, the control computer and so forth. Anybody who fixes it (whether you, a Mechanic, etc.) has to have in hand...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com