Suzuki Equator Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(28)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(28)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Suzuki Equator Valve Cover Gasket Replacement is $435 with $141 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Suzuki EquatorV6-4.0LService typeValve Cover Gasket ReplacementEstimate$686.48Shop/Dealer Price$784.29 - $1060.69
2009 Suzuki EquatorL4-2.5LService typeValve Cover Gasket ReplacementEstimate$719.19Shop/Dealer Price$795.00 - $1010.04
2011 Suzuki EquatorL4-2.5LService typeValve Cover Gasket ReplacementEstimate$719.19Shop/Dealer Price$795.07 - $1010.17
2012 Suzuki EquatorL4-2.5LService typeValve Cover Gasket ReplacementEstimate$719.19Shop/Dealer Price$795.07 - $1010.16
2012 Suzuki EquatorV6-4.0LService typeValve Cover Gasket ReplacementEstimate$667.56Shop/Dealer Price$764.80 - $1040.78
2009 Suzuki EquatorV6-4.0LService typeValve Cover Gasket ReplacementEstimate$667.56Shop/Dealer Price$762.00 - $1035.88
2010 Suzuki EquatorV6-4.0LService typeValve Cover Gasket ReplacementEstimate$667.56Shop/Dealer Price$761.74 - $1035.42
2010 Suzuki EquatorL4-2.5LService typeValve Cover Gasket ReplacementEstimate$719.19Shop/Dealer Price$795.07 - $1010.16
Show example Suzuki Equator Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(28)

Rating Summary
28
0
0
0
0
28
0
0
0
0

Ralph

39 years of experience
207 reviews
Ralph
39 years of experience
Suzuki Equator V6-4.0L - Oil Change - Seattle, Washington
Simple oil change, but "Ralph" treated my vehicle like it was his own. Nice person. Great service.

John

11 years of experience
94 reviews
John
11 years of experience
Suzuki Equator L4-2.5L - Oil Change - Chula Vista, California
Came right on time and did a very thorough job with the truck. This is an awesome service and such an amazing time savings.

Rusty

24 years of experience
567 reviews
Rusty
24 years of experience
Suzuki Equator V6-4.0L - Fuel Pump - Arlington, Texas
He was punctual . Completed the work quickly and was friendly

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
Suzuki Forenza L4-2.0L - Valve Cover Gasket - Fresno, California
He was professional

Excellent Rating

(28)

Rating Summary
28
0
0
0
0
28
0
0
0
0
Number of Suzuki Valve Cover Gasket Replacement services completed
308+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

P0333 OBD-II Trouble Code: Knock Sensor 2 Circuit High Input (Bank 2)
Trouble code P0333 means the input voltage from a knock sensor circuit in one of the cylinders is higher than the manufacturer's limitation.
A Buyer’s Guide to the 2012 Chevrolet Silverado
While While the Ford F-150 is still the best-selling pickup truck in the US, the 2012 Chevrolet Silverado is one of the finest half-ton pickups available today. In fact, the Silverado and the GMC Sierra are actually the same vehicle...
P0085 OBD-II Trouble Code: Exhaust Valve Control Solenoid Circuit Low (Bank 2)
P0085 P0085 trouble code definition P0085 is in reference to the exhaust valve control solenoid circuit bank 2. This may be seen with P0084 and P0086. There are bank 2 and bank 1 solenoids. What the P0085 code means P0085...

Spark plug replacement on 2011 BMW 328xi

Your vehicle was equipped with 100,000 mile spark plugs. The first recommended change is at 100,000 miles. If a Diagnostic Trouble Code has led you to test the ignition system and you find that an individual plug over coil tests...

car starts up fine it will drive rough running and few hundred feet and then completely down

Hello. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle...

Replace a power steering pump and the fluid boiling out the pump and still leaks.

Hi There, It is very uncommon for power steering fluid to boil. It may be more likely that the fluid may have air bubbles in it as a result of changing the power steering pump. Air bubbles in the system...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com