Subaru Tribeca Spark Plug Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Spark Plug Replacement Service

How much does a Spark Plug Replacement cost?

On average, the cost for a Subaru Tribeca Spark Plug Replacement is $650 with $244 for parts and $406 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Subaru TribecaH6-3.6LService typeSpark Plug ReplacementEstimate$938.48Shop/Dealer Price$1071.17 - $1445.73
2014 Subaru TribecaH6-3.6LService typeSpark Plug ReplacementEstimate$912.35Shop/Dealer Price$1039.91 - $1410.64
2010 Subaru TribecaH6-3.6LService typeSpark Plug ReplacementEstimate$912.35Shop/Dealer Price$1039.99 - $1410.77
2009 Subaru TribecaH6-3.6LService typeSpark Plug ReplacementEstimate$1047.35Shop/Dealer Price$1208.73 - $1680.76
2012 Subaru TribecaH6-3.6LService typeSpark Plug ReplacementEstimate$912.35Shop/Dealer Price$1044.26 - $1418.24
2011 Subaru TribecaH6-3.6LService typeSpark Plug ReplacementEstimate$912.35Shop/Dealer Price$1040.39 - $1411.47
2008 Subaru TribecaH6-3.6LService typeSpark Plug ReplacementEstimate$1047.35Shop/Dealer Price$1208.78 - $1680.84
Show example Subaru Tribeca Spark Plug Replacement prices

What are spark plugs and how do they work?

Spark plugs are one of the key components of your vehicle’s ignition system. They ignite gasoline and air inside of your engine. This gives your engine the power to propel you down the road. The spark plug takes high voltage electricity from the ignition coil and creates a spark at just right moment during the engine’s combustion cycle. This gives the engine the best mix of power, fuel economy and low emissions. However, the electrode at the end of the spark plug eventually wears out and can cause performance issues.

Spark plugs-MATROX-1

When should you replace spark plugs?

Replacement should follow the vehicle maintenance schedule. This will be listed in the vehicle’s owner’s manual. Some cars require regular replacement at 30k, 60k or 100k miles. It is possible in some cases that a spark plug might fail before the service schedule, but it’s not typically common.

Avoiding spark plug replacement can cause:

  • Difficulty starting your car.
  • Check engine light for a misfire code.
  • Flashing check engine light during acceleration for misfire, this can cause engine damage.
  • Reduced fuel economy and/or power.
  • Rough idle and/or unexplained engine vibration.
  • Failed State emission testing.

Even if only one spark plug is found to be faulty, they should always be replaced in sets. Most engines will require 4,6, or 8 spark plugs.

How do mechanics replace spark plugs?

Spark plugs are threaded into the engine’s cylinder head(s). Most cars have one plug per cylinder, so a four-cylinder engine will have four plugs, a six-cylinder engine will have six plugs, and so forth. The mechanic will:

  • Have the correct spark plugs on hand for your vehicle
  • Pull any diagnostic trouble codes that may be related to worn spark plugs.
  • Remove the original spark plugs and look at removed spark plugs for any clues indicating engine mis-operation exists; such as oil burning, excessively rich mixture, pre-ignition damage etc. Inform owner of any found unusual conditions.
  • Install new plugs using a torque wrench.
  • Finally, a road test of the vehicle to confirm normal operation.

Is it safe to drive with worn spark plugs?

Yes, but spark plugs that are worn enough to cause engine-misfiring have the potential to cause engine damage and overheating of the catalytic converter. Regardless of the age of the plugs, or mileage, if the engine misfires or runs poorly, the plugs should be inspected for defects. Generally, spark plug failure will not keep the engine from running, but in cases of extreme wear, you may experience a limitation in the speed at which you can drive the car. If the maintenance schedule says the plugs should be replaced, it is best to do so promptly.

When having spark plugs replaced keep in mind:

  • High-speed driving may accelerate spark plug wear. Consider earlier than required inspection and tune-up if you operate the car in severe conditions.
  • Plugs should always be promptly replaced per the manufacturer maintenance schedule even if they appear to be working perfectly.
  • If your vehicle is equipped with spark plug wires (as opposed to a coil-on-plug system), the wires should be replaced at the same time. This may increase the cost of your repair.
  • It is possible that when doing a spark plug replacement, your vehicle may also need additional parts like ignition coils, this will add to the repair cost.
  • Some engines require that the intake manifold be removed while replacing spark plugs. This may increase the parts and labor cost for the repair.
  • Leaking valve cover gaskets, which have let oil get in contact with the spark plugs, coils or wires, may be the cause of ignition system issues. Valve cover gaskets will need to be replaced in addition to the spark plugs, wires or coils. This will add to the repair cost.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(19)

Rating Summary
18
0
0
1
0
18
0
0
1
0

Nick

6 years of experience
12 reviews
Nick
6 years of experience
Tribeca 2008 - Brake Pads - Sugar Land, TX
Speedy, great work!

Excellent Rating

(19)

Rating Summary
18
0
0
1
0
18
0
0
1
0
Number of Subaru Tribeca services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
800+
experts on our platform

Recent articles & questions

How to Replace an Engine Mount
The engine mounts keep the motor in place. They need to be replaced if there is excessive vibration, impact noises under the hood, or engine movement.
P0533 OBD-II Trouble Code: A/C Refrigerant Pressure Sensor Circuit High Input
P0533 means the A/C refrigerant pressure is too high to safely function often due to inoperative cooling fans or too little or too much refrigerant.
P0053 OBD-II Trouble Code: HO2S Heater Resistance (Bank 1 Sensor 1)
P0053 code definition HO2S Heater Resistance (Bank 1 Sensor 1) What the P0053 code means This code means the Heated Oxygen Sensor...

Tail lights and dash lights not working.

I have a good idea of what your problem may be. It is common for the ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement) to go bad in your particular vehicle. This can lead to many different electrical system issues including your complaints of no...

Why is red oil warning light comes on and off - 2011 Chevrolet Cruze

One thing that could cause this is an oil pressure sensor fault (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement). This sensor measures oil pressure signals which are electrical. There could be a mechanical issue with the engine. You would need to check oil pressure with a...

CTV Transmission won’t shift out of 1st Gear ... No check eng light on

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com