Subaru B9 Tribeca Idle Control Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(36)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(36)

Idle Control Valve Replacement Service

How much does a Idle Control Valve Replacement cost?

On average, the cost for a Subaru B9 Tribeca Idle Control Valve Replacement is $436 with $341 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Subaru B9 TribecaH6-3.0LService typeIdle Control Valve ReplacementEstimate$797.87Shop/Dealer Price$978.59 - $1498.25
2006 Subaru B9 TribecaH6-3.0LService typeIdle Control Valve ReplacementEstimate$777.87Shop/Dealer Price$958.61 - $1478.28
Show example Subaru B9 Tribeca Idle Control Valve Replacement prices

What is the Idle Control Valve all about?

The Idle Control Valve is designed to control and maintain a consistent engine idle speed. The valve helps counter anything the driver may do to put extra load on the engine, such as turn on the air conditioning, sound systems, lights, etc. When the car is cold, the idle control valve helps the engine start.

Keep in mind:

The idle control valve usually goes bad because of excessive carbon buildup in the intake manifold.

How it's done:

  • Scan the computer system in the car for codes.
  • Check for any vacuum leaks.
  • Check electrical connections.
  • Remove and replace the idle air control valve if faulty.
  • Clean carbon out of intake manifold ports.
  • Clear Engine Check light.

Our recommendation:

It is a good idea to get an air induction service performed every 3 to 4 years. This will ensure that the carbon does not build up on the valve. When you are getting the idle control valve replaced, your mechanic should inspect the vacuum lines for leaks. If the vacuum is leaking, it will mimic the symptoms of a bad IAC valve.

What common symptoms indicate you may need to replace the Idle Control Valve?

  • When the engine is idle, (car not moving), the engine may stall.
  • Excessive racing noise from the engine.
  • Engine may shut off if AC is turned on.
  • Check Engine light is on.

How important is this service?

The idle control valve is responsible for maintaining a constant and consistent engine. It achieves this by ensuring that the idle speed is always constant. Many factors – such as a cold engine, the radio, or the air conditioning – effect the idling speed of the engine, so the idle control valve neutralizes these outside factors, and makes sure that the engine is consistently idling at a stable speed. When the idle control valve malfunctions, the idling speed is no longer regulated. This means that if you turn on the radio or the air conditioning, which requires power, your engine may stall. It also means that your vehicle may not be able to turn on.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(36)

Rating Summary
33
2
0
0
1
33
2
0
0
1

Nicholas

11 years of experience
589 reviews
Nicholas
11 years of experience
Subaru B9 Tribeca H6-3.0L - Brake Pads Replacement (Front) - Chapel Hill, North Carolina
Job well done. Competent, trusted and courteous and communicates well!

Marco

14 years of experience
34 reviews
Marco
14 years of experience
Subaru B9 Tribeca H6-3.0L - Oil Pan Gasket Replacement - Poway, California
Good communication. Knowledgeable. Trustworthy.

Zackery

5 years of experience
28 reviews
Zackery
5 years of experience
Subaru B9 Tribeca H6-3.0L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Everett, Washington
AWESOME MECHANIC! PROFESSIONAL WORK DONE, AWESOME PERSONALITY TOO.

Jeremy

5 years of experience
5 reviews
Jeremy
5 years of experience
Subaru B9 Tribeca H6-3.0L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Star, Idaho
4 stars only because there is always room for improvement

Excellent Rating

(36)

Rating Summary
33
2
0
0
1
33
2
0
0
1
Number of Subaru B9 Tribeca services completed
396+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
700+
experts on our platform

Recent articles & questions

2012 Ford Focus vs. 2012 Mazda 3: Which One Should I Buy?
Compact sedans and hatchbacks provide a great ride on a budget, with the evolution from a stodgy, unattractive exterior (and interior!) to a more fully-featured trim set and exterior design. Driving enjoyment is improved throughout the class, which are known...
3 Essential Things to Know About Your Car’s Turn Signal
The turn signal on your vehicle is mounted on the front and back of the vehicle, on both the...
How to Check Suspension Ball Joints
Ball joints are a suspension component that is found on virtually all vehicles. Ball joints are flexible joints...

How do you use the automatic headlights?

If your car is equipped with automatic headlights (optional equipment), you can set them to auto and they will come on when the ambient light level drops by a certain amount. Here’s what you need to know: Turn the engine...

Replacing ignition switch: How do I replace the ignition switch without the original key?

The only way to get out the ignition lock is to use a 3/4 inch drill through the center of the key hole and then dig out the debris and then you can put a screw driver in and turn...

Infinity G35 overheating after radiator replaced

It could be that you didn't get all of the air out of the cooling system. Sometimes that can involve extreme measures like taking off a heater hose or a pre-heater heater hose to let the air escape while filling...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com