Saturn Sky Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Saturn Sky Car Thermostat Replacement is $292 with $96 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Saturn SkyL4-2.0L TurboService typeCar Thermostat ReplacementEstimate$533.52Shop/Dealer Price$589.57 - $739.90
2007 Saturn SkyL4-2.0L TurboService typeCar Thermostat ReplacementEstimate$513.70Shop/Dealer Price$565.86 - $713.28
2008 Saturn SkyL4-2.0L TurboService typeCar Thermostat ReplacementEstimate$513.70Shop/Dealer Price$565.92 - $713.38
2007 Saturn SkyL4-2.4LService typeCar Thermostat ReplacementEstimate$396.91Shop/Dealer Price$447.64 - $593.98
2009 Saturn SkyL4-2.4LService typeCar Thermostat ReplacementEstimate$396.91Shop/Dealer Price$449.70 - $597.59
2010 Saturn SkyL4-2.4LService typeCar Thermostat ReplacementEstimate$396.91Shop/Dealer Price$447.83 - $594.32
2010 Saturn SkyL4-2.0L TurboService typeCar Thermostat ReplacementEstimate$513.70Shop/Dealer Price$565.95 - $713.43
2008 Saturn SkyL4-2.4LService typeCar Thermostat ReplacementEstimate$396.91Shop/Dealer Price$447.64 - $593.98
Show example Saturn Sky Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Saturn Sky Car Thermostat Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

P0857 OBD-II Trouble Code: Traction Control Input Signal Range/Performance
P0857 means that there is a malfunction found in the vehicle's traction control input signal circuit due to a faulty traction control switch.
P0248 OBD-II Trouble Code: Turbocharger Wastegate Solenoid B Range/Performance
P0248 code means the solenoid is not controlling wastegate activity in the intended manner due to a faulty solenoid, wiring, or a stuck wastegate door
The Guide To Colored Curb Zones in Arkansas
The The guide to colored curb zone laws in Arkansas Drivers in Arkansas need to be careful when they are driving on the roadways. They need to pay attention to the other motorists, and they have to obey the laws...

Horn only works intermittently

Hey there. It sounds like the horn switch is on it's way out if you are having an intermittent issue. Another way to tell would be to see if the horn sounds with the panic button on the key fob....

Lights wont go off - 2002 Honda Civic

Hello. From what you describe, it would appear that your vehicle is experiencing some sort of electrical issues. If its the brake lights that are staying on then the first thing I would do is check the stoplight switch (https://www.yourmechanic.com/services/brake-light-switch-replacement)...

Jeep won't turn over after sitting for 8 hours 2001 Jeep Cherokee

Hello - I would first check the battery cables and ground straps for corrosion, or other poor-connectivity problems (https://www.yourmechanic.com/question/car-doesn-t-turn-over-right-away-sometimes-by-brendan-d). A strong battery can be hampered by poor connections, which will sometimes finally pass current. A failing starter solenoid (burned contacts)...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com