Saturn Relay Lubricate Driveshaft at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Lubricate Driveshaft Service

How much does a Lubricate Driveshaft cost?

On average, the cost for a Saturn Relay Lubricate Driveshaft is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Saturn RelayV6-3.5LService typeLubricate DriveshaftEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Saturn RelayV6-3.5LService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Saturn RelayV6-3.9LService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Saturn RelayV6-3.9LService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Saturn Relay Lubricate Driveshaft prices

What is lubricating the driveshaft all about?

Along the drivetrain, whenever torque needs to travel from one place to another, a driveshaft is used. Some cars have two driveshafts under them, usually for four-wheel-drive applications. U-Joints are couplings that hold sections of driveshaft together and can withstand large amounts of torque. The U-joint and the slip both need lubrication to work smoothly. This means lubricant needs to be applied to every point where the driveshaft meets another section of shaft or any other part of the vehicle.

Keep in mind:

  • While lubricating will help with scraping noise and minor vibration, it will not repair actually broken parts.
  • Inspect the parts of the the driveshaft to make sure they do not need full replacement.
  • Even small spots of excess wear are bad on parts that withstand so much torque, no problem is too small to be addressed on the driveshaft.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The slip joints and U-joints on all drive shafts are located
  • The Zerk grease fittings on the slip joint and U-joints are located
  • New grease is pumped into the grease fittings with a grease gun
  • The vehicle is lowered off of the jack stands

Our recommendation:

Check the manual of your vehicle to see if the manufacturer has specific instructions on servicing and lubricating the driveshaft. If the manufacturer suggests it is time for a service or if the vehicle has symptoms of a malfunctioning driveshaft, then it should be done immediately. These parts are under a lot of force and will usually fail when the car is in motion. While under the vehicle, inspect all of the connections along the drivetrain and keep an eye out for any parts that seems excessively worn. Bring a rag and wipe any mud or dust off to check for damage.

What are the common symptoms indicating you need to lubricate the driveshaft?

  • Clicking or grating sounds while the vehicle is in gear
  • Vibration in the vehicle while it is running

How important is this service?

This service is very important. Poor lubrication is one of the top reasons why driveshafts fail. When they do fail, driveshafts will fail while in motion and can take out more expensive parts around them. These preventative maintenance steps are extremely important in order to avoid more costs down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(14)

Rating Summary
13
0
0
0
1
13
0
0
0
1

Richard

21 years of experience
237 reviews
Richard
21 years of experience
Saturn Relay V6-3.5L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Fort Myers Beach, Florida
On time . Nice guy. Did great job. Knew what he was talking about . Would use you again .

Abdul

11 years of experience
419 reviews
Abdul
11 years of experience
Saturn Relay V6-3.5L - Alternator - Tucker, Georgia
Working with Abduls was great. I felt he was friendly and professional.

James

30 years of experience
877 reviews
James
30 years of experience
Saturn Relay V6-3.9L - Camshaft Position Sensor Replacement - Orlando, Florida
He was very nice and out going great attitude and personality he does a great job

Michael

25 years of experience
187 reviews
Michael
25 years of experience
Saturn Relay V6-3.5L - Starter - Las Vegas, Nevada
Michael showed up a little early, was courteous, got the job done quickly, checked the engine thoroughly, very professional.

Excellent Rating

(14)

Rating Summary
13
0
0
0
1
13
0
0
0
1
Number of Saturn Relay services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

How to Register a Car in Illinois
All All vehicles must be registered through the Illinois Secretary of State’s (SOS) office. If you have just moved to Illinois, you must register your vehicle within 30 days in person at the SOS office. Auto insurance must be purchased...
How to Get Smog Technician Certified in California
Automotive technician jobs include smog certified emissions inspectors. In California, you need to work at an emissions testing station.
How to Replace an Ignition Ignitor
The ignition ignitor sends a signal to supply power and start the engine. A common sign of failure is a disruption in the engine's starting process.

Brake rotors stuck to the wheel, won't come off

On your vehicle, the rear brake rotors house the parking brake shoes. So, to start, make sure the parking brake is released before attempting to remove the rotors. If the rotor is still hard to get off, carefully hit it...

I scanned my mercedes ML 250 CDI 4Matic W166 with icarsoft MB 2 scanner. Its showing trouble code U144f00. What does it mean ?

The fault being reported is within a Controller Area Network (CAN) function (wiring or device) but the code itself is generic. According to MB, the particular scanner that you are using will have an accompanying description of the code as...

It's misfiring,then not, misfiring then not. Usually when the is off then when I try to start.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com