Saturn Outlook Throttle/Accelerator Pedal Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(77)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(77)

Throttle/Accelerator Pedal Position Sensor Replacement Service

How much does a Throttle/Accelerator Pedal Position Sensor Replacement cost?

On average, the cost for a Saturn Outlook Throttle/Accelerator Pedal Position Sensor Replacement is $262 with $167 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Saturn OutlookV6-3.6LService typeThrottle/Accelerator Pedal Position Sensor ReplacementEstimate$449.75Shop/Dealer Price$543.44 - $802.01
Show example Saturn Outlook Throttle/Accelerator Pedal Position Sensor Replacement prices

What is the Throttle/Accelerator Pedal Position Sensor all about?

On older vehicle designs, a simple throttle cable connects the accelerator pedal to the engine and controls the amount of fuel delivered to the engine. However, with fuel injected systems, that has changed. Newer engines now use electronics to control the amount of fuel sent to the engine based on accelerator pedal movement. This is the job of the accelerator pedal position sensor. It’s mounted to the gas pedal, and essentially translates the movement of the pedal (speed and position) into voltage, which tells the car’s computer how much fuel to supply for engine acceleration.

Keep in mind:

  • It’s impossible to check the operation of the accelerator pedal position sensor visually as it requires a voltmeter and an understanding of the proper voltage output range.
  • It’s possible for an accelerator pedal position sensor to operate intermittently.
  • A discrepancy in voltage will put the computer into “limp” mode, which provides significantly reduced power to prevent damage.

How it's done:

  • The throttle pedal position sensor is verified that it needs to be replaced. The throttle trim cover is then removed to access the sensor .
  • The defective throttle pedal position sensor is disconnected and removed.

  • The new throttle pedal position sensor is installed onto the firewall and reconnected.

  • The engine is started and the throttle pedal position sensor is tested for operation. The trim panel is then reinstalled.

  • The vehicle is road tested to ensure proper operation of the throttle pedal position sensor.

Our recommendation:

There is no set service or replacement period for your accelerator pedal position sensor. If you suspect a problem with your accelerator pedal position sensor, have one of our expert mechanics diagnose the system.

What common symptoms indicate you may need to replace the Throttle/Accelerator Pedal Position Sensor?

  • Lagging or intermittent acceleration
  • No acceleration
  • Limited power (limp mode)
  • No throttle response in Park or Neutral

How important is this service?

Because the accelerator pedal position sensor tells the car’s computer how quickly you’re depressing the accelerator pedal and controls the supply of fuel to the engine, replacement is very important. While your car will continue to operate even if there is a problem with the sensor, it will do so with limited capacity. Our experienced mechanics will use a voltmeter to determine sensor operation and diagnose the problem accurately. Have a faulty accelerator pedal position sensor replaced immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(77)

Rating Summary
72
4
1
0
0
72
4
1
0
0

Joe

23 years of experience
85 reviews
Joe
23 years of experience
Saturn Outlook V6-3.6L - Strut Assembly Replacement (Front) - Southlake, Texas
Exceptional service and mechanical knowledge.

Nathan

29 years of experience
260 reviews
Nathan
29 years of experience
Saturn Outlook V6-3.6L - Brake Pads Replacement (Rear) - Owasso, Oklahoma
Nathan was very knowledgeable and friendly. He was great to work with.

Diego

21 years of experience
564 reviews
Diego
21 years of experience
Saturn Outlook V6-3.6L - Brake System Inspection - Avondale, Arizona
Prompt on arrival time and explained everything well.

Xavier

16 years of experience
101 reviews
Xavier
16 years of experience
Saturn Outlook V6-3.6L - Spark Plugs - Jacksonville, Florida
Prompt, friendly, and knowledgeable. It took him 45mns to do a 2hr job.

Excellent Rating

(77)

Rating Summary
72
4
1
0
0
72
4
1
0
0
Number of Saturn Outlook services completed
847+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Booster Vacuum Sensor
A failing brake booster vacuum sensor will cause the brake pedal to be stiff or turn on the Check Engine Light.
Symptoms of a Bad or Failing Refrigerant Pressure Switch (Sensor)
Common signs include the AC working intermittently or not at all, noise coming from the system, or warm air blowing from the vents.
How Long Does a Speed Sensor Last?
Today’s Today’s cars are equipped with a very wide range of sensors. Yours has a mass airflow sensor, at least one oxygen sensor, and many others. The vehicle speed sensor (VSS) is usually located on the transmission’s output shaft (although...

ABS brakes grab (driver front) upon stopping.

Hey there. As you know, your car is equipped with wheel speed sensors at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS system which is controlled by the car's ECU. When...

The car idles fine. It revs up but slowly drops RPMs.

Hi there: The idle is controlled by the idle control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement), mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement), and throttle body (https://www.yourmechanic.com/services/throttle-body-replacement) of a fuel injected motor. Any of these components could be dirty, damaged, or have faulty wiring that is...

overheating and engine is shaking.

The condition that is causing the electric fans to come on selectively would be caused by the coolant sensor / switch. The sensor / switch is loosing contact connections causing the connections to the fans to cut off making the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com